España 800 900 532 | Fuera de España +34 911 776 121 | Bienvenido a nuestro nuevo sitio web. ¿Encontró algún problema o error? Por favor, infórmelo aquí.
MFR0122-Humidistat
Controlador de Humedad Relativa para Armarios
MFR0122-Humidistat
Desde
€
151,74
Resumen del Producto
- Velocidad del aire, máx. 50 ft/s
- Aplicaciones Sistemas de control de acceso y estacionamiento, Cajeros automáticos (ATM), Paneles de visualización, Alojamientos eléctricos y electrónicos, Sistemas de telecomunicaciones, Dispensadores de billetes
- Resistencia de contacto 10 MΩ
- Tipo de contacto Conmutación
- Conexión eléctrica Terminal de tornillo
- Nota sobre la conexión eléctrica Terminal de 3 polos, 3 x AWG 14 máx. [2,5 mm² (0,1 in2)]
- Clasificaciones del alojamiento IP20
- Factor de forma Bancada
- Altura 67 mm
- Histéresis Aprox. 4 % HR @ 50 % de humedad relativa
- Longitud 38 mm
- Vida útil mecánica 100,000 ciclos
- Montaje Clip para carril DIN de 35 mm (1,4") (EN 50022)
- Temperatura de operación, máx. 60 °C
- Temperatura de operación mínima 0 °C
- Humedad relativa 35 a 95%
- ID de serie MFR0122-Humidistat
- Temperatura de almacenamiento, máx. 80 °C
- Temperatura de almacenamiento, mínima -20 °C
- Tensión de alimentación 250 VCA
- Tipo de interruptor 1 A SPDT
- Capacidad de conmutación, máx. 5 A a CA 230 V (carga resistiva) 1,0 A a CA 230 V (carga inductiva con cos j = 0,8); CC 20 W
- Capacidad de conmutación, mínima 100 mA a CA/CC 20 V
- Peso 60 g
- Ancho 50 mm
- Calibre del cable 14 AWG
Supported Applications
The Omega MFR012 series is a mechanical hygrostat designed to control relative air humidity inside enclosures. The device activates heaters (de-humidifiers) or cooling fans at set humidity levels to prevent condensation and corrosion. Documented applications include electrical and electronic enclosures, telecommunication systems, display panels, ticket dispensers, ATM machines, and access/parking control systems.
Operating Conditions & Performance
The MFR012 operates within an ambient temperature range of 0 to 60°C (32 to 140°F) with a storage temperature capability from -20 to 80°C (-4 to 176°F). The adjustment range covers 35 to 95% relative humidity, and the series supports measurement up to 100% RH. Switching difference (hysteresis) is approximately 4% RH @ 50% relative humidity. Permissible air velocity is rated at 50 ft/sec (15 m/s). The unit carries an enclosure rating of NEMA 2 (IP20).
Electrical Switching Specifications
- Contact Type: Change-over contact (SPDT)
- Maximum Switching Voltage: 250 Vac
- Minimum Switching Capacity: 100 mA @ AC/DC 20 V
- Maximum Switching Capacity: 5 A @ AC 230 V (resistive load); 1.0 A @ AC 230 V (inductive load at cos j = 0.8); DC 20 W
- Contact Resistance: <10 mOhm
- Service Life: 100,000 cycles
Note: The critical relative humidity for most components is documented as 65%. Above 65% RH, condensation can cause malfunction of electronic equipment. Additionally, attention is required that 250 V should only be switched in a non-condensing environment.
Compliance
The series meets EMI/EMC compliance standards EN 55014-1-2, EN 61000-3-2, and EN 61000-3-3.
Configuration Options
The MFR012 series is configured for DIN rail mounting via a clip for 35 mm (1.4") DIN rail per standard EN 50022. Electrical connection utilizes a 3-pole terminal accepting up to 3 x AWG 14 max [2.5 mm² (0.1 in²)]. The unit is powered by a supply range of 20 Vdc to 230 Vac.
Physical Characteristics
- Dimensions: 67 H x 50 W x 38 mm D (2.64 x 1.97 x 1.5")
- Weight: 60 g (2 oz)
Key Product Differences
The series is represented by the model number MFR01201220000, described as a mechanical humidity control with SPDT output, covering 35 to 100% RH and operating on 20 Vdc to 230 Vac. The general model numbering format follows MFR012 - <MODEL NUMBER>.
PDFs y Manuales
