España 800 900 532 | Fuera de España +34 911 776 121 | Bienvenido a nuestro nuevo sitio web. ¿Encontró algún problema o error? Por favor, infórmelo aquí.
Particulate-Matter
PM2.5, 0-500 µg/m3, 4-20 mA y 0-10 Vcc, Modbus RS-485
- Monitorización de la calidad del aire
- Purificadores de aire
- Estándar WELL Building
Particulate-Matter
Desde
Resumen del Producto
- Exactitud ± 10 μg/m3
- Detalle de Exactitud +/- 10 % de lectura @ 100 ~ 500/600 μg/m3 @ 25°C/50 %HR
- Aplicaciones Aire y climatización, Construcción y mantenimiento, Monitorización medioambiental
- Homologaciones CE, RoHS2
- Interfaz de datos Modbus RTU, RS485
- Conexión eléctrica Terminal de tornillo
- Salida eléctrica 4 a 20 mA, 0 a 10 Vcc
- Material del alojamiento Plástico ABS
- Clasificaciones del alojamiento UL94 V-0
- Tipo de entrada Ventilador
- Resistencia del bucle, máx. 4-20 mA: 500 Ohmios máximo (Predeterminado)
- Opción de construcción de los materiales ninguno
- Humedad de funcionamiento 0 a 95 % HR, sin condensación
- Temperatura de operación, máx. 122 °F
- Temperatura de operación mínima 32 °F
- Protección IP30 (Sala)
- Salida de relé 3 A a 30 Vcc, 3 A a 250 Vca
- Resolución 1 µg/m3
- Tiempo de respuesta En modo de servicio continuo, tiempo de muestreo <1s, tiempo de respuesta <10s
- Tipo de sensor Sensor láser de partículas
- ID de serie Particulate-Matter
- Vida útil MTBF de más de 3 años en modo de servicio continuo, vida útil de hasta 8-10 años en modo de servicio automático (intermitente)
- Temperatura de almacenamiento, máx. 70 °F
- Temperatura de almacenamiento, mínima -30 °F
- Suministrar corriente de alimentación 50 mA
- Tensión de alimentación 16 a 28 VCA, 16 a 35 VCC
- Par de apriete 0,45 lb-in (0,5 Nm) nominal
- Punto de disparo Nota Punto de disparo del relé: 100 (configuración de fábrica), ajustable por el usuario
- Tiempo de calentamiento 15 minutos
- Peso 270 g
- Calibre del cable 22 a 16 AWG
Supported Applications
The ACI PM series transmitters are designed to measure particulate matter (PM) concentration in the air. The product overview identifies specific measured substances including smoke, smog, bacteria, fine dust, and liquid droplets. These units utilize a laser particulate matter sensor operating on a laser scattering principle with fan sampling.
Operating Conditions & Performance
The series supports two measurement ranges: particles less than 2.5 µm in diameter (PM2.5) and particles less than 10 µm in diameter (PM10). The sensor operates via a laser scattering principle with fan sampling.
Power requirements are specified as 24 VDC or 24 VAC. Output signals include 0-10 VDC, 4-20 mA, and RS485 Modbus RTU communication. Electrical connections utilize terminal blocks for 1 or 2 wires per position to allow daisy chaining.
Installation warnings note that performance may decrease in extreme environments such as high humidity, high temperature, excessive dust, or oil mist. The sensor is sensitive to strong light entering the housing and vibration. To maintain accuracy, installation should avoid air registers, diffusers, vents, windows, confined areas (shelves, closed cabinets), heat sources (lamps, radiators, direct sunlight), and wall cavities with unsealed penetrations.
Configuration Options
The series offers configurable output signals and communication protocols. Available outputs include 0-10 VDC on Terminal 3, 4-20 mA on Terminal 4, and RS485 (Modbus RTU). The sensor features two jumper-selectable modes: Normal for continuous monitoring and Auto to reduce measuring time and extend service life; the default mode is AUTO.
Communication parameters are configurable via Modbus registers or menu adjustments:
- Baud Rate: 9600 (default) or 4800
- Parity: None, Odd, Even
- Slave Address: Configurable from 1 to 255 (1-32 recommended)
- Function Codes: Supports 03H/06H; address 0 is for broadcast and 255 (0xFF) for special mode read data
The series supports relay control with multiple modes defined by parameters including Set Point, Dead Band, Actuate Delay, and Restore Delay. Relay activation can be configured to trigger below a set point, above a set point, between high/low limits, or outside high/low limits.
Key Product Differences
The series includes distinct model configurations identified by part numbers PM-D, PM-R, PM-R-LCD, and PM10-D. The PM-ROOM designation is referenced in the product overview for room-based monitoring applications. Physical dimensions vary between housing styles; one configuration measures 4.79" (121.55 mm) height x 3.268" (82.00 mm) width x 0.984" (25.00 mm) depth, while another measures 3.99" (101.353 mm) height x 4.331" (110.00 mm) width x 4.921" (125.00 mm) depth.
Wiring recommendations specify the use of 16 to 26 AWG twisted pair or shielded cable, with Belden 3105 recommended for Modbus communication wiring due to its 120 ohm input impedance. RS-485 networks require daisy chain topology; 'Star' or 'T' wiring is not supported. A termination resistor (120 Ω) controlled by a jumper on J8 is required at the last device in the chain.
PDFs y Manuales
