España 800 900 532 | Fuera de España +34 911 776 121 | Bienvenido a nuestro nuevo sitio web. ¿Encontró algún problema o error? Por favor, infórmelo aquí.
Nickel-Room
RTD de Níquel para Ambiente
- Detección de temperatura ambiente
- Aplicaciones de sensores decorativos de pared
- Edificios de oficinas
- Escuelas
- Colegios
- Edificios comerciales
- Oportunidades OEM
Nickel-Room
Desde
Resumen del Producto
- Exactitud 21,1 ºC (70 ºF): +/- 0,17 ºC (+/- 0,34 ºF)
- Opción de calibración N/A
- Tipo de curva PTC (coeficiente de temperatura positivo)
- Nota sobre la pantalla Tensión de alimentación de la pantalla LCD: 9 V DC a 35 V DC / 24 V AC (50 Hz a 60 Hz); Corriente/VA de alimentación de la pantalla LCD: < 4 mA / 0,12 VA; Precisión de la pantalla LCD: ±2 °F o ±2 °C a 21,5 °C (71 °F) típico; Vida útil de la pantalla LCD: mínimo 50.000 horas
- Tipo de pantalla LCD
- Conexión eléctrica Bloque de terminales
- Clasificaciones del alojamiento UL94-HB
- Número de puntos de detección 1
- Corriente de operación 5 mA
- Humedad de funcionamiento 10 a 95 % HR, sin condensación
- Temperatura de operación, máx. 121 °C
- Temperatura de operación mínima -40 °C
- Tiempo de respuesta 8 segundos nominales
- Efecto de autocalentamiento 0,3 °C / mW
- ID de serie Nickel-Room
- Tolerancia del punto de ajuste +/- 10 % del rango
- Estabilidad +/- 0,05 % después de 1000 horas a 150°C (302°F)
- Temperatura de almacenamiento, máx. 65 °C
- Temperatura de almacenamiento, mínima -40 °C
- Coeficiente de temperatura Din 43760
- Rango de medición de temperatura -40 a 121 °C
- Tipo de sensor de temperatura RTD de níquel de 1000 ohmios
- Par de apriete 0,5 Nm (mínimo)
- Nota sobre el peso Serie A/1K-NI-R/RS/RO: 0,14 lbs. (63,5 g)
- Tamaño del cable, máx. 26 AWG
Supported Applications
The ACI Nickel Room Series consists of temperature sensors designed for indoor environmental monitoring. These non-polarity, non-position sensitive devices are intended for mounting on walls or junction boxes to provide ambient air temperature sensing via a nickel RTD element.
Operating Conditions & Performance
Sensors operate within an ambient range of 1.5 °C to 50 °C (35 °F to 122 °F) and support storage temperatures from -40 °C to 65 °C (-40 °F to 149 °F). The series is rated for humidity levels between 10 % and 95 % RH, non-condensing. Accuracy specifications for the nickel sensor element are documented as +/- 0.4 °C (+/-0.72 °F) @ 0 °C (32 °F), +/- 0.17 °C (+/-0.34 °F) @ 21.1 °C (70 °F), and +/- 0.56 °C (+/-1.00 °F) @ 54.4 °C (130 °F). The sensor output is nominal at 1 KΩ @ 21.1 °C (70 °F).
Configuration Options
The series offers configurable housings, communication options, and control features to accommodate specific installation requirements.
- Housing Styles: Available in "R" enclosures (ABS Plastic, Beige, UL94-HB) or "R2" enclosures (ABS Plastic, White, UL94-HB). Dimensions are 69.85 mm (2.75 in) width by 114.30 mm (4.50 in) height with a depth of 28.55 mm (1.12 in).
- Configuration Options: Models include Room only, Room with Override (O), Room with Set Point (S), and combinations such as RSO or R2SO.
- Communication Jacks: Optional modular connectors include RJ4 (4 Pin 4 Conductor RJ9/RJ10/RJ22 style), RJ6 (6 Pin 6 Conductor RJ12 Modular Phone Connector), or a 3.5 mm (1/8 in) Stereo Jack.
- Setpoint Configuration: Field-selectable slidepots allow for direct acting or reverse acting configurations with various resistance ranges, including A09 (0 Ω to 2 kΩ) and A10 (0 Ω to 1 kΩ). Setpoint indication options include temperature ranges such as B4 (55 °F to 85 °F), C5 (COOL/WARM), or G5 (BLUE/RED for R2 Enclosure).
- Electrical Connections: Screw terminal blocks are non-polarity sensitive and accept wire sizes from 16 AWG (1.31 mm²) to 26 AWG (0.129 mm²). Terminal block torque is rated at a minimum of 0.5 Nm and maximum of 0.6 Nm.
- Accessories: A thermally-insulated backing pad (A/ROOM-FOAM-PAD) is available for mounting on solid walls to minimize thermal drafts from the wall surface.
Key Product Differences
Variants within this series differ by enclosure color and style, presence of override or setpoint functionality, communication jack type, and specific slidepot configurations. The "R" version features a beige ABS plastic housing, while the "R2" version utilizes white ABS plastic. Models designated with "O" include an Override option (default Short Thermistor; field selectable Dry Contact closure), whereas models with "S" or "SO" incorporate setpoint adjustment capabilities via internal slidepots.
PDFs y Manuales
