Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
Back To Top
[+]
DIN Rail Signal Conditioners
Added to Your Shopping Cart
The DIN Rail DMD4380 Series converts, amplifies, filters and optically isolates mA or V input signals to process current or voltage outputs. Loop powered w/ 1200V isolation.
| Product Number | Input Type |
|---|---|
|
|
Voltage, Current
|
|
|
Current, Low Voltage
|
The DRSL-TEMP is an output loop powered temperature signal conditioner. Accepts Type J, Type K, or 2, 3 or 4 wire Pt100 RTD input. Slim housing, high accuracy.
| Product Number | Input Type |
|---|---|
|
|
Thermocouple, RTD
|
The DRST-DC measures unipolar or bipolar DC current and voltage signals. Passive/active current buffered output voltage. Additional programmer required.
| Product Number | Input Type |
|---|---|
|
|
Current, Voltage, Potentiometer
|
The DRG-AR Series Conditioners are TC, RTC, DC or AC voltage and current input with 2 SPDT Relay Outputs. Field configurable ranges with adjustable setpoints.
| Product Number | Input Type |
|---|---|
|
|
RTD
|
The DRA-TCI-RTI Series are 2 wire Temperature Signal Conditioners/Transmitters. There are TC and RTD input models with 4-20mA output. They are isolated and field rangeable
| Product Number | Input Type |
|---|---|
|
|
RTD
|
The DRST-BG is a load cell & strain gage amplifier that converts mV to current or voltage. Front panel programmable LED display | Calibration of input span, external taring.
| Product Number | Input Type |
|---|---|
|
|
Voltage
|
The DRST-AC measures AC current or voltage signals and outputs passive or active current signals. UL and c-UL approved. Universal power. Programmer required.
| Product Number | Input Type |
|---|---|
|
|
AC Current , Voltage
|
The DRSL-SP3 is a repeater/splitter that isolates and converts 1 bipolar process input to 2 process outputs. DIP switch selectable ranges, slim housing, high accuracy.
| Product Number | Input Type |
|---|---|
|
|
Voltage, Current
|
The DRSL-SP1 is a repeater/splitter that isolates and converts 1 current input to 2 current outputs. Slim housing, high accuracy (0.05%), no setup needed.
| Product Number | Input Type |
|---|---|
|
|
Current
|
DIN-100 Conditioners convert analog signals to RS-485 to a PC or other processor based equipment. Input types are temperature, bridge, V or mA, D I/O. NV memory storage.
| Product Number | Voltage Measurement Range |
|---|---|
|
|
100 V
|
DRA-ACT-4 Series DIN Rail Conditioners take a 4 wire AC Current/Voltage input and converts to 4-20mA output. AC Powered 115V or optional 230 V power.
| Product Number | Power Consumption | Supply Voltage |
|---|---|---|
|
|
0.3 VA
|
115 Vac
|
|
|
1.4 VA
|
220 Vac
|
The DRSL-SP2 is a repeater/splitter that isolates and converts 1 process input to 2 process outputs. DIP switch selectable ranges. Slim housing, high accuracy (0.05%)
| Product Number | Input Type |
|---|---|
|
|
Voltage, Current
|
The DRC-4710 and 4720 are DIN Rail bridge input signal conditioners that accept bridge (strain gage, load cell, or voltage) inputs and have 0-10Vdc or 4-20mA outputs.
| Product Number | Electrical Output |
|---|---|
|
|
0 to 10 Vdc
|
The DRF-LC Series Conditioners are load cell input with 0-10V or 4-20mA output. For load cells with 1, 2, or 3 mV/V output. Full scale at 10, 20, or 30mV. Pre-tare jumpers
| Product Number | Voltage Measurement Range |
|---|---|
|
|
0 to 20 mV dc
|
The DRSL-DC1-DC2 Conditioners have a DC current and voltage input and isolated and converted DC current and voltage output. DIP switch selectable range. 0.2% accuracy
| Product Number | Input Type |
|---|---|
|
|
Voltage, Current
|
The DRSL-DISPLAY Programmer is required to program DRST-AC, DRST-DC, DRST-UN, DRST-UR, DRSL-U devices. Snaps onto the front panel with transferable configurations.
| Product Number | Display Type |
|---|---|
|
|
LCD
|
DIN Rail Signal Conditioners
DIN Rail Signal Conditioners support data acquisition workflows by helping ...