Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
MM-Configurable
Highly Configurable, High Accuracy, Custom Pressure Transducers
- High Accuracy, Up to ± 0.05%
- Customer Selectable Features
- Over 1,000,000 Feature Combinations
- Premium Temperature Performance
Can't find the right model?
Use our custom configurator to fine tune your product
Product Overview
- ADC Resolution None
- Bandwidth DC to 1 kHz
- Insulation Resistance 100 MΩ @ 50 Vdc
- Materials, Wetted 316L Stainless Steel
- Media Compatibility Any, Clean dry air / inert gas, Clean process / cooling water, Corrosive chemicals / acids / bases, Fuel gases, HVAC / room air, Hydraulic fluids, Inert / non-reactive gases, Liquids, Oils / lubricants, Organic solvents, Steam, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Water, Water-based fluids
- Operating Temperature, Max 121 °C
- Operating Temperature, Min -45 °C
- Pressure Cycles 1 million, minimum
- Measurement Pressure, Min 0 psi
- Response Time <1 ms
- Series ID MM-Configurable
- Stability ± 0.1%
- Stability Note Long Term Stability (1-Year): ± 0.1% FS typical.
Build/Order/Ship OMEGA’S MM Series Custom Pressure Transducers to meet your pressure sensing requirements
As a lead pressure transducer manufacturer, Omega has developed a new interactive configuration tool that provides a fast and simple way to build custom transducer suitable for application. MM Series custom transducers allow for over 1-million possible combinations of parameters such as pressure type, range, unit, material, output, accuracy, fitting, temperature compensation range, and electrical termination. At the end of the process, the Configurator will provide a part number, price and delivery time for the transducer.
OMEGA’s micro-machined piezoresistive pressure transducers have a proven record in high performance commercial, automotive, test and measurement and aerospace applications. The piezoresistive process uses strain gages molecularly embedded into a highly stable silicon wafer. The silicon wafer is diced into individual die which each contain a full strain gage bridge. The die is mounted in a sealed chamber protected from the environment by glass to metal seals and a pressure sensitive stainless steel diaphragm. A small volume of silicone oil transfers the pressure from the diaphragm to the strain bridge. The construction provides a very rugged transducer with exceptional accuracy, stability and thermal effects.
Some of the most Popular Applications of Pressure Transducers include: Measuring inlet, outlet, or system pressure in engine test setup Measuring pressure drops in a line for preventive maintenance Measuring fluid height or level in tanks Measuring a water pipe leak or gas leak and monitoring gas pressure Maintaining pressure in food and beverage lines Sanitary pressure measurement in the bio or pharmaceutical industry.
Pressure type
(A) Absolute(G) Gage(SG) Sealed Gage
(CG) Compound Gage
(B) Barometric
(V) Vacuum
(DWU) Differential WW Uni-Directional
(DWB) Differential WW Bi-Directional
(DDU) Differential WD Uni-Directional
(DDB) Differential WD Bi-Directional
Pressure Range
(10W) 10 inH2O(001) 1 psi
(2.5) 2.5 psi
(005) 5 psi
(015) 15 psi
(030) 30 psi
(050) 50 psi
(100) 100 psi
(150) 150 psi
(250) 250 psi
(500) 500 psi
(600) 600 psi
(750) 750 psi
(1.0K) 1000 psi
(1.5K) 1500 psi
(2.5K) 2500 psi
(3.5K) 3500 psi
(5.0K) 5000 psi
(16) 16-32 inHG ABS
(26) 26-32 inHG ABS
(32) 0-32 inHG ABS
Output
(V) 3mv/V(V5) 0-5 Vdc
(V1) 10mv/V
(V10) 0-10 Vdc
(C1) 4-20mA
(BIV) ± 3mv/V
(BIV1) ± 10mv/V
(BIV10) ± 0-10 Vdc
(BIC1) 4-20mA (12mA set at zero)
(USBH) USBH (High Speed)
(R4V) RS485 (Voltage)
(R4I) RS485 (Current)
Pressure Unit
(P) PSI(B) Bar
(H) hPa (mbar)
(K) kPa (W) inH2O (4ËšC)
(M) inHg (0ËšC)
(T) TORR (mm-Hg)
(F) ft-H2O (4ËšC)
Accuracy
(1) 0.03%(2) 0.05%
(3) 0.08%
(4) 0.20%
(5) 0.40%
Process Fitting
(A) 1/8-27 MNPT(B) 1/8-27 FNPT
(C) 1/4-18 MNPT
(D) 1/4-18 FNPT
(J) 7/16-20 UNF-M
(K) 7/16-20 UNF-F
(L) 9/16UNF-M
(M) 9/16UNF-F
(MA) G 1/8B-M
(MB) G 1/8B-F
(MC) G 1/4B-M
(MD) G 1/4B-F
(ME) M12X1.5M
(MF) M12X1.5F
Electrical Connection
(0) Cable (ONLY OPTION FOR USBH)(1) Bendix
(2) Conduit
(3) 6 PIN GMS
(5) M12 (ONLY OPTION FOR RS485)
(6) Mini-DIN
(8) GW Cable
(9) GW Conduit Cable
Temperature Compensation
(T1) 40-140ËšF (4 -60ËšC)(T2) 0-200ËšF (-18-93ËšC)
(T3) 20-140ËšF (-7-60ËšC)
(T4) -40-220ËšF (-40-105ËšC)
(T5) 20-200ËšF (-6-93ËšC)
(T6) 25-185ËšF (-4 TO 85ËšC)
(T7) 15-220ËšF (-9.4 TO 104ËšC)
(T8) -40-185ËšF (-40-85ËšC)
(T9) 0-185ËšF (-18-85ËšC)
Thermal Accuracy
(A1) ± 1.0% Z ± 0.7% S(A2) ± 0.8% Z ± 0.6% S
(A3) ± 0.5% Z ± 0.5% S
(A4) ± 0.3% Z ± 0.3% S
(A7) ± 0.9% Z ± 0.5% S
(A8) ± 0.8% Z ± 0.3% S
(A10) ± 1.0% Z ± 1.0% S
Options
(P) Potentiometers(S) Shunt Cal
(CE) CE Mark
(MB) Mounting Bracket - Barometric only
Example Model Number:MM A 100 V5 P 1 J 1 T4 A4 S
PDFs & Manuals