Skip to search Skip to main content Skip to navigation

Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
  1. Home
  2. See Data Acquisition
  3. See Signal Conditioning
  4. See DIN Rail Signal Conditioners
  5. DIN Rail Universal Input Transmitter with Push Button User Trim
We noticed you are in , please visit your local site by clicking the below link for regional offers and support.
Stay here.
Go to the site >
DIN Rail Universal Input Transmitter with Push Button User Trim
Click and hold to zoom

TXDIN1600-Series-Tx

DIN Rail Universal Input Transmitter with Push Button User Trim

  • Simple Configuration Via USB Port
  • Universal Pt100, Thermocouple, mV, mA Input
  • Isolated Input
  • Push Button User Trim (TXDIN1610 and TXDIN1620)
TXDIN1600-Series-Tx
From TWD 11,897
Shop Models
1 Variations available
See all series options below
TXDIN1600-Series-TxData Sheet

Data Sheet
DIN Rail Universal Input Transmitter with Push Button User Trim TXDIN1600-Series-Tx TXDIN1600-Series-Tx
Product Overview
  • Accuracy ± 0.04 mV, ± 0.008 mA
  • Approvals CE, RoHS
  • Approvals Note CE tested to BS EN 61326
  • Cable Length 2.5 mm
  • Electrical Connection Screw Terminal
  • Height 17.5 mm
  • Input Type Thermocouple, RTD, Voltage, Current
  • Isolation 500 Vdc
  • Length 90 mm
  • Materials Polyimide 6.6
  • Mounting DIN Rail Mount
  • Number of Inputs 3
  • Operating Temperature, Max 70 °C
  • Operating Temperature, Min -20 °C
  • Output Detail Type: 3-wire voltage output with programmable ranges: 0 to 10, 0 to 5, 2 to 10, 1 to 5, and 0 to 1V. Output Drive: 2 mA driving 5 kΩ @ 10V. User Trim: Raise and lower buttons, active for offset when output is at offset and span, trim lock option
  • Output Value Process
  • Relative Humidity 10 to 95% RH non-condensing
  • Response Time <500 ms
  • Response Time Note <500 ms to reach 95% of final value; start up time <3 s
  • RTD Accuracy ±0.1 °C
  • Serial Number Reverse connection and over-voltage protection, max over voltage current 100 mA
  • Series ID TXDIN1600-Series-Tx
  • Shell Color Gray
  • Software Windows PC Software
  • Storage Temperature, Max 85 °C
  • Storage Temperature, Min -40 °C
  • Thermocouple Accuracy Type K,J,E,N,T: ± 0.1 %, Type R,S: ± 0.5 °C
  • Voltage Measurement Range -40 to 75 mV
  • Width 17.5 mm

Supported Applications

The Omega TXDIN1600 Series comprises universal DIN rail mounted transmitters and trip amplifiers designed for signal conditioning in industrial environments. The series accepts common process sensor inputs including Thermocouples (K, J, E, N, T, R, S), RTDs (Pt100), millivolt signals, and milliampere currents to provide standardized output signals or control actions.

Operating Conditions & Performance

The series operates within an ambient temperature range of -20 to 70°C (-4 to 158°F) with a humidity rating of 10 to 95% RH non-condensing. Storage temperatures are specified from -40 to 85°C (-40 to 185°F). Response time is documented as less than 500 ms to reach 95% of the final value, with a start-up time under 3 seconds.

Accuracy specifications vary by input type and range:

  • Thermocouples (K, J, E, N, T): 0.1% of FSR ±0.5°C (±0.9°F)
  • Thermocouples (R, S): ±0.5°C (±0.9°F) ±0.1% of FSR** (*Only over the range 800 to 1600°C*)
  • Pt100: ±0.1°C (±0.9°F)/±0.05% of rdg
  • mV Input (-40 to 75 mV): ±0.04 mV
  • mA Input (-10 to 25 mA): ±0.008 mA

Note: Accuracy for Pt100 and thermocouple does not include sensor and cold junction errors.

Configuration Options

The TXDIN1600 Series is configurable across three primary models to address specific signal transmission or control needs:

  • TXDIN1610: Universal DIN rail transmitter with 4 to 20 mA, 2-Wire Output.
  • TXDIN1620: Universal DIN rail transmitter with 3-wire isolated voltage output (configurable ranges: 0 to 10 V, 0 to 5 V, 1 to 5 V, or 2 to 10 V).
  • TXDIN1630: Universal DIN rail trip amplifier with dual relay outputs rated at 250 Vac 1 Amp.

All models feature a USB interface for configuration and user trim, powered via the PC during setup. The enclosure is constructed from Polyamide 6.6 (self-extinguishing) in grey, measuring 17.5 W x 56.4 D x 90 mm L (0.7 x 2.2 x 3.5"). Electrical connections utilize screw terminals compatible with cables up to 2.5 mm Max.

Power supply requirements are model-specific:

  • TXDIN1610: 11 to 30 Vdc, 24V nominal
  • TXDIN1620: 15 to 24 Vdc
  • TXDIN1630: 24 Vdc ±5% @ 40 mA max

The series includes CE testing to BS EN 61326 and RoHS compliance. A maximum loop load of 600 Ω @ 24V is specified for the current output model.

Key Product Differences

Differences between models are defined by their output architecture:

  • TXDIN1610 vs. TXDIN1620: The 1610 provides a standard two-wire current loop (4 to 20 mA), while the 1620 offers isolated three-wire voltage outputs with selectable ranges.
  • TXDIN1630 Distinction: Unlike the transmitter models, the TXDIN1630 functions as a trip amplifier providing dual relay contacts for switching applications rather than analog signal transmission.

All variants support universal input types (K, J, E, N, T, R, S thermocouples; Pt100 RTDs; mV; mA) and include user trim functionality. The series requires DIN rail mounting inside a suitable enclosure providing environmental protection to IP65 or greater.

en-TW
en_TW
Save Configuration