검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

DRST-DC-Univ-BP-Sig-Cond

DIN 레일 범용 단극/양극 DC 신호 컨디셔너

재고가 있는 모델
  • 단극/양극 DC 전류 및 전압 신호 측정
  • 패시브/액티브 전류 출력 및 버퍼드 전압 출력
  • 25 mV에서 300 VDC 범위에 대한 매우 우수한 신호 동적 범위
  • 빠른 < 20 ms 응답 시간 및 우수한 0.05% 정확도
DRST-DC-Univ-BP-Sig-Cond
시작 516,040 원
재고가 있는 모델
DIN 레일 범용 단극/양극 DC 신호 컨디셔너 DRST-DC-Univ-BP-Sig-Cond DRST-DC-Univ-BP-Sig-Cond
loading all models
제품 개요
  • 승인 UL, RoHS
  • 승인 사양 참고 UL: UL 508/CC22.2 no. 14, LVD: 2014/35/EU, EMC: 2014/30/EU, RoHS: 2011/65/EU
  • 대역폭 40 Hz
  • 최대 보정 온도 28 °C
  • 보정 온도, 최소 20 °C
  • 디스플레이 유형 프로그래머
  • 전기 출력 0 ~ 23 mA
  • EMC 면역 사양 참고 NAMUR NE21, A 기준, 버스트: < ±1% 스팬, 전도성 방출, 클래스 A: 150 kHz ~ 10 MHz
  • EMC 표준 NAMUR NE 21
  • 외함 등급 IP20
  • 높이 109 mm
  • 고립 2.3 kVac
  • 길이 104 mm
  • 하중 저항 현재 출력: 1000 Ω/± 20 V @ ±20 mA, 전압 출력: 2 kΩ, 버퍼드 전압 출력: > 500 kΩ 최소
  • 장착 DIN 레일 35 mm 표준, EN 60715
  • 노이즈 보정 >60 dB
  • 작동 온도, 최대 60 °C
  • 최소 작동 온도 -20 °C
  • 출력 값 과정
  • 전력 소비 2.5 W
  • 전력 소산 2.0 W
  • 상대 습도 <95% RH
  • 스크류 단자 토크 0.5 Nm
  • 시리즈 ID DRST-DC-Univ-BP-Sig-Cond
  • 신호 역학 입력 24비트
  • 신호 역학 출력 18비트
  • 안정성 부하 안정성: 스팬의 ≤0.01%/100 Ω
  • 저장 온도, 최대 85 °C
  • 보관 온도 최소 -20 °C
  • 전원 유형 AC / DC
  • 전압 손실 입력 전압 강하: 0.6 V @ 20 mA 정격
  • 무게 250 g
  • 폭 23.5 mm
  • 와이어 게이지 26 to 14 AWG

Supported Applications

The Omega DRST-DC series is a Universal Uni-/Bipolar Signal Transmitter designed for DIN rail mounting. It functions as a signal conditioner within data acquisition and control systems, processing universal input signals to standardized output formats.

Operating Conditions & Performance

The device operates with a supply voltage of 24 VDC ± 10% and consumes ≤ 1.5 W of power. It provides electrical isolation rated at 1500 VAC and features an input impedance ≥ 10 MΩ. The common mode rejection is specified as ≥ 100 dB.

Performance parameters include a maximum load resistance of 600 Ω for current outputs. The ambient operating temperature range is -20°C to +60°C, with an enclosure rating of IP20. Input error indication and input limits are configurable via the device settings.

Electrical Specifications

  • Supply Voltage: 24 VDC ± 10%
  • Max Load Resistance: 600 Ω
  • Input Impedance: ≥ 10 MΩ
  • Output Current Ranges: 0-20 mA, 4-20 mA
  • Output Voltage Ranges: 0-5 V, 0-10 V
  • Common Mode Rejection: ≥ 100 dB
  • Isolation: 1500 VAC
  • Power Consumption: ≤ 1.5 W

Configuration Options

The DRST-DC series supports a range of input and output signal configurations to accommodate universal uni-polar or bi-polar signals.

Signal Configurations

  • Voltage Outputs: 0-5 V, 0-10 V
  • Current Outputs: 0-20 mA, 4-20 mA

Housing and Mounting

The series is designed for DIN rail mounting according to the standard DIN EN 60715. An optional display/programming front panel (DRSL-DISPLAY) is available as an accessory.

Key Product Differences

The primary variation within this family involves the selection of input and output signal types, allowing configuration for specific process requirements such as 0-10 V or 4-20 mA loops. The device includes configurable parameters for input error indication and limits.

Terminal Connections

  • Supply: Terminals 21, 22
  • Input: Terminals 41, 42, 43, 44
  • Output: Terminals 11, 12, 13, 14
ko-KR
ko_KR
설정 저장