Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
FSV10-Series
100:1, 1/4 in Compression, 316ss, Electronic Proportioning Valves
100:1, 1/4 인치 압축, 316ss, 전자 비례 밸브- 펄스폭 변조 제어 회로
- 0~5 Vdc 또는 4~20 mA 설정값 입력 허용
- 내식성 316 및 416 스테인리스강/FKM 재질
FSV10-Series
From
1,293,197
원
Product Overview
- 승인 RoHS, CE
- 승인 사양 참고 EMC 지침 89/336/EEC EN55011:1991; 그룹 1, 클래스 A EN50082-2:1995
- 케이블 길이 8 in
- 전기 연결 9 - 핀 D 커넥터
- 유량 노트 기준 차압 10 psig(690 mbar) 기준.
- 높이 1 in
- 입력 제어 신호 0 ~ 5 Vdc, 4 ~ 20 mA
- 진공 상태 누설률 10^⁻9 cc 미만 He/s
- 길이 3 in
- 제품 구조 옵션 해당 없음
- 접액부 재질 316 스테인리스 스틸, 416 스테인리스 스틸, FKM
- 최대 작동 압력 500 psi
- 작동 온도, 최대 50 °C
- 최소 작동 온도 0 °C
- 압력 유형 차동
- 프로세스 연결 크기 1/4인치
- 프로세스 연결 유형 압축 피팅
- 공정 온도, 최대 54 °C
- 최소 공정 온도 -10 °C
- 응답 시간 500 ms
- 시리즈 ID FSV10-Series
- 공급 전력 참고 12~30 Vdc, 12 Vdc에서 1 A; 24 Vdc에서 0.5 A, 9핀 D 커넥터 또는 DC 전원 잭을 통해
- 공급 전압 12 ~ 30Vdc
- 표면 온도, 최대 54 °C
- 턴다운비 100:1
- 밸브 높이 3.45 in
- 밸브 길이 3.25 in
- 밸브 종류 보통 닫혀 있습니다
- 밸브 폭 1 in
- 폭 3 in
Supported Applications
The Omega FSV10 Series consists of electronically controlled proportional solenoid valves designed for clean liquids and gases. These devices utilize a pulsewidth-modulated control circuit to maintain flow proportional to an analog input signal, making them suitable for industrial applications requiring precise valve control.
Operating Conditions & Performance
The series operates within specific environmental and process limits defined by the driver electronics and valve construction. Ambient temperature ranges from 0 to 50°C (32 to 122°F), while fluid temperatures are supported between -10 to 54°C (14 to 130°F). The valves feature a maximum pressure rating of 500 psig (3448 kPa) and a typical valve surface temperature of 54°C (130°F) with 24 Vdc power input.
Performance characteristics include a turndown ratio of 100:1 and a response time maximum of 500 msec. Leak integrity is specified at 1 x 10⁻⁹ sccs (helium, individually tested). Maximum differential pressure ratings are 50 psid (345 kPa) for most models; the FSV15 model lists a limit of 35 psid (241 kPa).
Configuration Options
The series offers configurable flow capacities through five distinct orifice sizes, ranging from 0.51 mm to 3.18 mm. All models utilize ¼" compression fittings for process connection and are constructed with wetted materials of 316 and 416 stainless steel (SS) with FKM O-rings.
Control inputs accept either a 0 to 5 Vdc or 4 to 20 mA setpoint signal. A TTL-level input is available for shutdown regardless of the analog signal state. Power requirements are 12 to 30 Vdc, supplied via a 9-pin D connector or DC power jack (1 A @ 12 Vdc; 0.5 A @ 24 Vdc). Output power level is jumper-selectable.
Key configuration options include:
- Housing Dimensions: Driver electronics measure 7.62 W x 7.62 D x 25.4 mm H (3 x 3 x 1").
- Total Assembly Size: Valve with driver measures 87.6 H x 87.6 L x 25.4 mm W (3.45 x 3.25 x 1.00") including compression fittings.
- Electrical Connection: 9-pin D connector or DC power jack; includes 20 cm (8") wires on the valve with a mating 9-pin D connector.
- Power Supply Option: FSV-PW accessory provides an 110 Vac/24 Vdc wall socket power supply with a 1.7 m (5.5') cord.
Key Product Differences
The series is differentiated by model number, which corresponds to specific orifice sizes and flow capacities for air and water at defined differential pressures:
- FSV11: 0.51 mm (0.02") orifice; Cᵥ 0.009.
- FSV12: 1.02 mm (0.04") orifice; Cᵥ 0.033.
- FSV13: 1.4 mm (0.055") orifice; Cᵥ 0.055.
- FSV14: 1.6 mm (0.063") orifice; Cᵥ 0.068.
- FSV15: 3.18 mm (0.125") orifice; Cᵥ 0.24.
The FSV-PW accessory is available as a separate item to provide the required power supply via wall socket connection.
PDFs & Manuals