Salta alla ricerca Salta al contenuto principale Salta alla navigazione

United Kingdom 0800 488 488 | Intl +44 (0) 161 777 6611 | Welcome to our new website, found an issue or bug? Please report it here
  1. Home
  2. VediTemperatura
  3. VediRTD
  4. VediSensori ed elementi a filo RTD
  5. 100 Pezzi Elementi RTD in Platino a Film Sottile
Abbiamo notato che ti trovi in , visita il tuo sito locale facendo clic sul link qui sotto per offerte e supporto regionali.
Rimani qui.
Vai al sito >
100 Pack Thin Film Platinum RTD Elements
Clicca e tieni premuto per ingrandire

F-Series

100 Pezzi Elementi RTD in Platino a Film Sottile

100 Pack Thin Film Platinum RTD Elements
  • Venduto in confezioni da 100
  • Profilo piatto e piccolo
  • Specifiche DIN EN 60751 (secondo IEC 751)
  • Intervallo di temperatura da -70 a 500°C (-94 a 932°F)
F-Series
Da
Acquista Modelli
0 Variazioni disponibili
Vedi tutte le opzioni della serie qui sotto
F-SeriesScheda Dati

Scheda Dati
100 Pack Thin Film Platinum RTD Elements F-Series F-Series
Panoramica del Prodotto
  • Insulation Resistance > 10 MΩ
  • Insulation Resistance Note >10 MΩ @ 20°C; >1 MΩ @ 500°C
  • Number of Wires 2
  • Response Time, Air 4.0 sec @ 50%; 12.0 sec @ 90%
  • Nota sul tempo di risposta Response Time Water Current (v=0.4 m/s) t0.5 = 0.2 s; t0.9 = 0.4 s Air Stream (v = 1 m/s) t0.5 = 4.0 s; t0.9 = 12.0 s
  • Tempo di risposta, acqua 0.2 sec @ 50%; 0.4 sec @ 90%
  • Effetto di autoriscaldamento 0.4 K/mW @ 0°C
  • Altezza del sensore 0.8 mm
  • ID serie F-Series
  • Resistenza agli urti 100 g Acceleration with 8 ms Half Sine Wave
  • Coefficiente di temperatura 0.00385Ω/Ω/°C
  • Tipo di sensore di temperatura RTD
  • Resistenza alle vibrazioni 10 to 2000 Hz sweep rate, acceleration 40g
  • Diametro del cavo 0.2 mm
  • Lunghezza del cavo 10 mm

Supported Applications

The Omega F-Series consists of OMEGAFILM® flat profile thin film platinum resistance temperature detectors (RTDs) sold in packs of 100. These elements are designed for high accuracy and stability, conforming to DIN EN 60751 (According to IEC 751). The series features a ceramic substrate with a platinum thin-film layer and glass coating, intended for integration into temperature sensing systems requiring precise resistance-based measurement.

Operating Conditions & Performance

The F-Series elements operate within a process temperature range of -70 to 500°C (-94 to 932°F). Accuracy is defined by tolerance classes: Class B (±(0.3 + 0.005t) °C), Class A (±(0.15 + 0.0025t) °C), and Class 1/3B (±(0.1 + 0.0017t) °C). The Temperature Coefficient of Resistance (TCR) is specified as 0.003851 ± tolerance depending on class.

Performance characteristics include long-term stability with a maximum Ro-Drift of 0.04% after 1000 hours at 500°C. The elements are resistant to vibration (≥40 g, 10–2000 Hz) and shock (100 g Acceleration with 8 ms Half Sine Wave). Insulation resistance exceeds 10 MΩ at 20°C and 1 MΩ at 500°C. Self-heating is rated at 0.4 K/mW at 0°C.

Response times vary by medium and velocity: t<sub>0.5</sub> = 0.2 s; t<sub>0.9</sub> = 0.4 s in water (v=0.4 m/s); t<sub>0.5</sub> = 1 ms; t<sub>0.9</sub> = 4.0 s in air (v=1 m/s); and t<sub>0.9</sub> = 12.0 s in air (v=0.9 m/s).

Configuration Options

The series supports multiple configurations across nominal resistance, physical dimensions, and tolerance classes.

  • Nominal Resistance: 100 Ω, 500 Ω, and 1000 Ω options are available.
  • Tolerance Classes: Class A, Class B, and Class 1/3B tolerances correspond to specific temperature ranges (e.g., Class 1/3B is listed for 0 to 100°C; Class A for -30 to 350°C).
  • Dimensions: Available sizes include 2.2 x 2.2 x 0.8 mm, 2.0 x 10 x 0.8 mm, 2.0 x 4.0 x 0.8 mm, and 1.5 x 4.0 x 0.8 mm.
  • Electrical Connection: Platinum Clad Nickel Wire Leads, 10 L x 0.2 mm D (0.39 x 0.008").
  • Wetted Materials: Platinum thin-film layer, Glass layer coating, Ceramic substrate.

To minimize self-heating error based on measuring conditions, the series recommends limiting current to a maximum of 1 mA for 100 Ω elements, 0.7 mA for 500 Ω elements, and 0.3 mA for 1000 Ω elements.

Key Product Differences

The F-Series model number guide follows the format: F<series><nominal_resistance><tolerance>-<size>-<temperature_class>. For example, part number F2222-100-B-100 denotes a 2.2 x 2.2 mm element with 100 Ω nominal resistance and Class B tolerance.

Specific model families differ by physical footprint:

  • F2222 Series: Dimensions of 2.2 x 2.2 x 0.8 mm, available in 100 Ω and 1000 Ω resistances.
  • F2010 Series: Elongated dimensions of 2.0 x 10 x 0.8 mm, offered in 100 Ω, 500 Ω, and 1000 Ω configurations.
  • F2040 Series: Dimensions of 2.0 x 4.0 x 0.8 mm, available across 100 Ω, 500 Ω, and 1000 Ω resistances with Class A, B, or 1/3B tolerances.
  • F1540 Series: Compact dimensions of 1.5 x 4.0 x 0.8 mm, offered in 100 Ω resistance with various tolerance classes.
it-IT
fr_FR
Salva Configurazione