Passer à la recherche Passer au contenu principal Passer à la navigation

Besoin d'aide? Appelez-nous: 1-800-663-4209

Nous avons remarqué que vous êtes dans , veuillez visiter votre site local en cliquant sur le lien ci-dessous pour des offres et un support régionaux.

PX5500-MV

High Performance Pressure Transducer, Long Term Reliability

High Performance Pressure Transducer Long Term Reliability Aerospace Quality
  • Haute précision de 0,1 %
  • Fiabilité à l'état solide
  • La conception de la jauge de contrainte par pulvérisation cathodique offre une qualité de niveau aérospatial
  • Résistance élevée aux chocs et aux vibrations pour les applications aérospatiales et industrielles difficiles
High Performance Pressure Transducer Long Term Reliability Aerospace Quality PX5500-MV PX5500-MV
loading all models
Aperçu du produit
  • Précision ± 0.1 %
  • Classe de précision < 0.1%
  • Précision Linéarité combinée, hystérésis et non-reproductibilité : ± 0,10 % FSO (BFSL) < 1000 psi ± 0,15 % FSO 1000 psi et plus
  • Fonctions supplémentaires 1 Câble de 1,5 m
  • Pression d'éclatement 3x pleine échelle
  • Note sur la pression d'éclatement 3 fois la pression nominale
  • Longueur du câble 0.6 m
  • Température compensée, max 82 °C
  • Température compensée, min -18 °C
  • Connexion électrique Câble
  • Connexion électrique Remarque Coût additionnel par pied au-delà de 0,6 m (2') de câble
  • Puissance électrique 3 mV/V
  • Remarque sur la sortie électrique 30 mV typ, 26 mV min
  • Décharge électrostatique Protégé jusqu'à 15 kV
  • Résistance d'entrée 2500 Ω
  • Résistance d'isolation 500 MΩ
  • Connecteur correspondant MIL-26482-I 10-6S
  • Fréquence naturelle 5 kHz pour 1 bar (15 psi), augmentant logarithmiquement jusqu’à 50 kHz pour 5000 psi
  • Température de fonctionnement, max 150 °C
  • Température de fonctionnement, min -54 °C
  • Résistance de sortie 2500 Ω
  • Signal de sortie Millivolt
  • Pression, min 0 psi
  • Type de pression Absolue
  • Taille du raccordement au process 1/4 po
  • Type de raccordement au process NPT mâle
  • Pression d'épreuve 2x pleine échelle
  • Pression d'épreuve Remarque 2 fois la pression nominale
  • Élément de détection Pont à jauge de contrainte à 4 bras actifs
  • Remarque sur l'élément de détection Pont à 4 bras actif utilisant des éléments à film mince déposés par pulvérisation cathodique
  • ID de série PX5500-MV
  • Résistance aux chocs Niveau de qualification de 100 g, 11 ms, onde sinusoïdale demi-période sans dommage
  • Stabilité ± 0,1 %
  • Remarque sur la stabilité ± 0,1 % pour 18 mois Stabilité de l’étalonnage
  • Tension d'alimentation 10 Vcc
  • Effet thermique sur l'erreur d'étendue, max ± 0,0025 % FSO/°F
  • Effet thermique sur l'erreur zéro, max ± 0,0025 % FSO/°F , ± 0,0025 % FSO/°F
  • Poids 200 g

Supported Applications

The Omega PX5500/PXM5500 Series consists of high-performance thin film pressure transducers designed for testing, R&D/engineering test laboratories, functional test systems, production testing, product quality assurance, flight testing, gas turbine and engine test standards, ground support equipment, hydraulic systems, and custody transfer measurements. These solid-state devices feature a sputtered strain gage design engineered to provide high shock and vibration resistance with low drift.

Operating Conditions & Performance

The series offers measurement ranges from 0-15 to 0-10,000 psi for standard models and 0-1 to 0-600 bar for metric models. Accuracy is specified as ±0.10% FSO (BFSL) for ranges below 1000 psi and ±0.15% FSO for 1000 psi and above, based on a 5-point NIST calibration standard. Hysteresis and repeatability are both rated at ±0.025% FSO/°F.

Operating conditions span an ambient temperature range of -18 to 82°C (0 to 180°F) and a process temperature range of -54 to 150°C (-65 to 300°F). The transducers are compatible with gas, light oil, and dense liquid media. Wetted materials consist of 17-4 PH or 15-5 PH SS.

Pressure limits include a continuous pressure rating of 2 times rated pressure or 15,000 psi (whichever is less) and a burst pressure limit of 3 times rated pressure or 20,000 psi (whichever is less). Shock qualification meets the level of 100 g, 11 ms half sine wave without damage. Vibration performance at 35 g peak sinusoidal vibration from 10 Hz to 2000 Hz results in output not exceeding 0.04% FSO/g for the 15 psi range, decreasing to 0.003% FSO/g for 1000 psi and above.

Configuration Options

The PX5500/PXM5500 Series is configurable across pressure ports, electrical connections, ranges, units, output signals, and options. The overall dimensions are a maximum length of 74 mm (2.90 in) and a maximum diameter of 25.7 mm (1.01 in), with a weight not exceeding 200 g (7 oz).

Pressure Ports

  • Standard: MS33656-4 or G¼B Male/Female for metric models.
  • Available options include ¼-27 NPT Male, ¼-27 NPT Female, ¼-18 NPT Male, and ¼-18 NPT Female. Military connectors MS33656-4 and MS33649-4 are also supported.

Electrical Connections & Outputs

  • Standard electrical connection is PTIH-10-6P (mating connector PTS06A-10-6S sold separately).
  • Alternative connections include a mini DIN connector or an integral 0.6 m (2 ft) cable.
  • Output signals available are mV/V, 0 to 5 V, and 4 to 20 mA.

Ranges & Units

  • Standard models cover ranges from 15 psi up to 10K psi (e.g., 0-15, 0-25, 0-50... 0-10,000).
  • Metric models cover ranges from 1.0 bar up to 600 bar.
  • Pressure types include Absolute (A), Gage (G), and Sealed Gage (S).

Options & Accessories

  • CAL11: 11-point calibration certificate available as an option.
  • Pressure snubbers are offered for specific media types including Gas, Light Oil, and Dense Liquid in both NPT (PS-4G, PS-4E, PS-4D) and G¼B (PS-4G-MG, PS-4E-MG, PS-4D-MG) configurations.

Key Product Differences

The series is divided into two primary model families: the PX5500 for standard units and the PXM5500 for metric units. While both share similar performance characteristics, they differ in their default pressure port standards (MS33656-4 vs G¼B) and available range increments.

Output configurations vary by model selection; mV/V is a standard output option alongside 0 to 5 V and 4 to 20 mA. The series supports both Absolute, Gage, and Sealed Gage pressure types across the documented ranges. Specific model numbers follow the format PX5500/PXM5500 - Pressure Port - Electrical Connection - Range - Units - Output - Options.

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 5ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 27ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
fr-CA
fr
Enregistrer la configuration