Besoin d'aide? Appelez-nous: 1-800-663-4209
LVU800-Series
Transmetteur de niveau ultrasonique alimenté en boucle
Modèles en stock
- Simple, Fast Setup with Pushbutton Calibration and LCD Display
- Four Measurement Ranges Available up to 10 m (32')
- 6-segment LCD Display Indicates Air Gap or Liquid Level (Inch or Centimeter Units)
- 5 cm (2') Minimum Beam Width for Applications with Restricted Space
LVU800-Series
À partir de
C$
1 493.92
Modèles en stock
Aperçu du produit
- Accuracy ± 0.2 %
- Configuration Push button
- Display lcd
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP65, NEMA Type 4X
- Height 5.5 in
- Length 5.2 in
- Loop Resistance 500 Ω @ 24 Vdc
- Materials FKM, Fluoroelastomer, PC, ABS, Polyvinylidene Fluoride
- Memory Non - Volatile
- Number of Digits 6
- Number of Wires 2
- Operating Pressure, Max 30 psi
- Operating Temperature, Max 71 °C
- Operating Temperature, Min -40 °C
- Output Signal Current
- Process Temperature, Max 60 °C
- Process Temperature, Min -20 °C
- Series ID LVU800-Series
- Signal fail-safe 4 mA, 20 mA, 21 mA, 22 mA or hold last
- Temperature Compensation Automatic
Le transmetteur à ultrasons à 2 fils à usage général de la série LVU800 permet une mesure de niveau sans contact jusqu'à 10 m (32') et est idéal pour les liquides ultra-purs, corrosifs ou résiduels difficiles à traiter. Étalonné à l'aide d'un bouton-poussoir, ce transmetteur est largement utilisé pour le stockage en vrac à l'air libre, les réservoirs journaliers et les puisards de déchets. Parmi les exemples de fluides, on peut citer les eaux usées et l'hydroxyde de sodium.
PDF & Manuels
Accessoires
accessories
Écrou de décharge de traction noir de remplacement, ouverture de connecteur de conduit de 1/2 po
C$37.55 / each
0 En stock
installation hardware
Afficher les évaluations et les avis
Rated 4 out of
5
by
Ronald Smith from
Great little unit
Small footprint, easy to program, accurate, dependable
Date published: 2016-10-06
Rated 5 out of
5
by
Jim T from
Great, affordable device.
We use these in water stand tanks. Good Product. Great price
Date published: 2026-08-03
Rated 5 out of
5
by
Mike K from
Great Level Transmitter
Excellent instrument for a modest cost.
Easy to setup
Good repeatability.
Date published: 2021-09-29
Rated 4 out of
5
by
wolfebrand from
Simple, dependable level transmitter
We have been using these Omega Level sensors for more than 10 years now. I like them because they are simple to use and install, work well for our application, they tend to be pretty dependable as well as accurate, to within about 1/4" the best I can tell.
We use them to monitor liquid chlorine bleach (Sodium Hypochlorite) in a 1,100 and 2,000 gallon plastic tanks.
Date published: 2021-02-01
Rated 5 out of
5
by
Anonymous from
V-notch weir measurement
We use this to measure the depth of water for a v-notch weir on a Fluid Metering experiment in Chemical Engineering. The V-notch weir is an ancient way of measuring water and is taught to show the evolution of water measurement. The original one I bought from Omega had a loose wire from 8 years of use and the measurements made no sense. I bought this model again as it works great for our needs.
Date published: 2020-09-23
you · a few seconds ago we want to purchase level transmitter for use on caustic closed tank and HNO3 Closed tanks. please suggest us the model which is compatible to these liquids. range of tanks are upto 5meters.
Thank you for your interest in this product. Please email flow@omega.com and will address it with additional questions required.
Date published: 2023-07-18
the water in the tank we plan on monitoring is 85C. I noticed it lists maximum ambient temperature is 60C. Any thoughts on whether that might be a problem?
Thank you for your inquiry and unfortunately, the electronics will be affected with the higher temperatures mentioned and the sensor will not output any readings.
Date published: 2023-07-19