1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
FPB1400-Series
Plastic Paddlewheel Flow Meters With Optional RTD Sensor
Modèles en stock
- Easy to Install and Operate
- Mounts in Any Direction
- Only One Moving Part
- Visual Flow Indication
FPB1400-Series
Depuis
C$
984.90
Modèles en stock
L'aperçu du produit
- Précision ± 1 %
- Approvals CE
- Electrical Output Amplified Square Pulse, NPN Open Collector
- Height 2.2 in
- Length 4.25 in
- Operating Pressure, Max 150 psi
- Operating Pressure, Min 0 psi
- Output Detail Amplified Square Pulse, NPN Open Collector (load 30 mA maximum)
- Pressure Drop Note Maximum Pressure Drop: 15 psi on size 2 units 20 psi on all other sizes
- Measurement Pressure Type Gauge
- Process Connection Type NPT Female
- Process Temperature, Max 60 °C
- Response Time 1 s
- Response Time Note At 1 sec 10 to 90% of full scale, at 2 sec below 10% of full scale
- Supply Current 2 mA
- Supply Power Note 5 to 24 Vdc @ 2 mA
- Supply Voltage 5 to 24 Vdc
- Viscosity Note Calibrated 1 cSt, up to 50 cSt with field calibration
- Viscosity Range 1 to 50 cSt
- Width 2.2 in
Fluid flowing through the FPB1400 causes the paddlewheel to spin. As the magnets embedded in the paddle spin past the sensor, electrical pulses are produced in which frequency is proportional to the flow rate. The number of pulses per desired time interval and the K-factor (number of pulses/gallon) make it is easy to calculate the flow rate and volume passing through the unit.
PDF et manuels
