The DMD-460 Series bridge amplifiers/conditioners are AC or DC powered signal conditioning modules for strain gages, load cells and bridge-type sensors with V or mA output.

The LC107 series are ideal for measuring small spaces requiring precise measurements. They have ± 0.1% linearity in capacities from 2 to 20 lbf.

The CC1 family of stainless steel, ATEX certified, load cells are primarily designed for use as polished rod (pump off control) sensors in oil and gas pumping applications.

The Omega Link SP-010 seamlessly integrates bridge devices into your sensor network. It accepts 4-wire bridge sensors through a M12 4-pin connector and features digital I/O.

The PT06F series of rugged, industrial connectors is available with either RoHS or MIL-C 26482G compliant finishes and feature a cable clamp designed for strain relief.

RTD probes intended for use in thermowells. Spring loaded for optimal thermal contact. Include an adjustable spring, 1/2" NPT threaded fitting & 4-pin M12 connector.

RTD probes intended for use in thermowells. Spring loaded for optimal thermal contact. Include an adjustable spring, 1/2" NPT threaded fitting & 4-pin molded M12 connector.

The new DP400S Strain Meter is designed as a display for load cells and pressure sensors and includes an isolated power supply for the strain-gauge.

Thermocouple handle probes feature a spring-loaded thermocouple band and compact sensor design. Made from high temperature materials for measuring surface temps up to 760°C.

Spring-loaded thermocouple probes with a powerful single or dual 12lb pull magnet ideal for easily mounting to and measuring the surface temperature of ferrous metals.

The DMD4059 Series converts wheatstone strain bridge sensors, pressure transducers, or load cell signals into process current or voltage. Offered with AC or DC Power.

Spring-loaded RTD probes with a powerful 13lb pull magnetic housing ideal for easily mounting to and measuring the surface temperature of ferrous metals up to 400°C.

The Series RHP-E/N Wall Mount Transmitter offers accurate humidity, temperature, and dew point readings in a sleek design, perfect for various monitoring applications.

The MSX Magnesense® Differential Pressure Transmitter offers 32 pressure ranges and dual outputs, ideal for building control in various applications. Easy to install and read.

Explosion-proof Differential Pressure Transmitter has a flexible pressure calibration, programmable with HART communication, and push button configuration.

The Pro Differential Pressure Transmitter offers 32 configurable ranges for precise monitoring in critical environments. Ideal for building performance and air flow applications.

Positive, negative and differential pressures can be measured within a full span accuracy of ± 0.25.

The Mercoid® Series 3200G Explosion-Proof Pressure Transmitter features easy configuration, high accuracy, and is FM approved for hazardous locations. Ideal for various industries.

Loop powered 4-20 milliamp output transmitter with ABS/Polycarbonate enclosure and two on-display alarms. Includes fixed or spring loaded RTD probe.

Differential Pressure Transmitter senses pressure of air and gases and sends an output signal. Designed to mount in the same diameter cutout as a Magnehelic gage.