Skip to search Skip to main content Skip to navigation

IN-UVI

Wheatstone Bridge In-Line Amplifier

Click and hold to zoom

Choose a Variant

Output Signal

Current, Voltage

See all Models See all accessories

TWD87,702 / each

Item# IN-UVI

Added to Your Shopping Cart

In Stock

Lead Time (If not in stock): 5 Days

+ Add to Project List

See Specs

Product Specs

<< See all Product Models

Brand
Approvals	CE
Bridge Resistance	350 to 5000 Ω
Calibration Note	Field Installed Shunt Calibration resistor with remote activation for bridge calibration
Capacitance	0.022 µF
EMC	<0.15% of FS per EN61326-1 (industrial)
Electrical Output	4 to 20 mA, ± 5 V, ± 10 V @ 2 mA
Enclosure Ratings	IP65
GrossWeightValue	0.15
Height	34.8 mm
Input Noise	10 mV peak to peak @ 3 mV/V voltage mode (10 Vdc) 20 uA peak to peak current mode
Input Range	90 mA, 0.5 mV/V to 4 mV/V in 0.5 steps
Input Range Note	Current: 90 mA maximum (must be capable of supplying 200 mA), Sensor Input: 0.5 mV/V to 4 mV/V in 0.5 steps
Input Type	Current, Signal
Isolation	100 MΩ @ 500 Vdc
Length	134.8 mm
Linearity	0.0001
Load Resistance	700 Ω at 20 mA
Long Term Stability	0.1% of FS/year
Operating Temperature, Max	60 °C
Operating Temperature, Min	-20 °C
Output Detail	Current: 4 to 20 mA, 12 mA zero ± 8 mA outputs field programmable, Voltage: ± 5 volts, ± 10 volts at 2 mA maximum
Output Resistance	60 Ω
Output Signal	Current, Voltage
Protection	Short Circuit Protection: Yes +output to -output
Response Time	200 µs
Response Time Note	200 µs (0 to 63%)
Sensitivity	Bridge : 1 to 8 mV/V @ 5 Vdc EXC, 0.5 to 4 mV/V for 10 Vdc EXC
Sensor Excitation	5 or 10 Vdc field programmable; 30 mA @ 10 Vdc
Series ID	IN-UVI-Bridge-Amplifier
Span Adjustment	± 20 % fine ± 40 % coarse
Supply Power	22 to 32 Vdc
Supply Power Note	22 to 32 Vdc isolated from output
Supply Power Type	DC
Thermal Span Effect	0.0025%/°F
Thermal Zero Effect	0.001%/°F
Trim Pot Access	Behind connector endcaps
Width	31.2 mm
Zero Setting Adjustable Range	± 30%
Country of Origin	Spain
See All Specs Show Less

PDFs & Manuals

IN-UVI-Series_spec IN-UVI-Bridge-Amplifier View More

View Less