Series-3500

Smart Differential Pressure Transmitter, HART®, customizable

High accuracy (± 0.075% FS)
Rangeability (up to 25:1)
Completely Configurable using zero/span buttons (no calibrator required)
Fail-mode process function
Automatic ambient temperature compensation

See Product Overview

Series-3500

From ^TWD 55,479

Shop Models

5 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy ± 0.075 %
Accuracy Detail ± 0.075% FS (@ 20°C)
Applications Chemicals, Filter Monitoring, Fluid Measurement and Control, Food and Beverage, Fuel and Gas, Level Monitoring and Control, Oil, Petrochemical, Pump Control
Compliance Note CE 0518 II 2G ia/db IIC T6/T5 Gb Ta<80°C, T5 / II 2D Ex ia/tb IIIC T85°C/T100°C Db. EN 60079-0:2012+A11:2013,EN 60079-1:2014, EN 60079-11:2012, EN 60079-26:2015, EN 60079-31: Ex ia/db IIC T6/T5 Gb / Ex ia/tb IIIC T85°C/T100° Db. IEC 60079-0:2011, IEC 60079-1:2014-06, IEC 60079-11:2011, IEC 60079-26:2006, IEC 60079-31:2013.
Damping Time 0 to 60 s
Electrical Connection 1/2 in NPT female Conduit with Screw Terminal block
Electrical Output 4 to 20 mA
Enclosure Ratings IP66, IP67, NEMA Type 4X
Long Term Stability ≤0.075% FSO/3 years
Materials Aluminum
Materials, Wetted 316L Stainless Steel, FKM
Media Compatibility Fuel gases, HVAC / room air, Inert / non-reactive gases, Steam, Hydrogen, Nitrogen, Oxygen
MTBF 1,000,000 hours
Output Signal Current
Measurement Pressure Type Differential
Process Connection Size 1/4 in
Process Connection Type NPT Female
Response Time 16 to 480 ms
Series ID Series-3500
Supply Power Type DC
Supply Voltage 10 to 55 Vdc
Thermal Effects < ± 0.05% span/10°C

The Series 3500 Smart Differential Pressure Transmitter is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and is programmable using HART® Communication. The Series 3500 is capable of being configured for differential pressure or level applications with the zero and span buttons. A field calibrator is not required for configuration. The transmitter software compensates for thermal effects, improving performance. EEPROM stores configuration settings and stores sensor correction coefficients in the event of shutdowns or power loss. The Series 3500 can be configured for use in hazardous (classified) locations. The rangeability allows the smart transmitter to be configured to fit any application.