Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
RTD-810-Series
RTD Probes with Mounting Threads and Lead Wire
Models In Stock
- Precision 100 Ohm Class A DIN Platinum Element
- Temperature Coefficient (Alpha) = .00385 ohm/ohm/°C
- 3-Wire Configuration with PFA Insulated and Jacketed Lead Wire and Miniature 3-Pin Connector with Mating Connector
- Temperature Range -200 to 750 ºC (Cable to 260 ºC)
RTD-810-Series
From
TWD
5,895
Models In Stock
Product Overview
- Accuracy Class A
- Cable Material Nickel, Copper
- Insulation PFA
- Nominal Resistance 100 Ω
- Nominal Resistance/Curve Note Provided with High-Accuracy Class “A” 100 Ω Element (Standard)
- Number of Wires 3
- Probe Diameter 0.125 in
- Probe Length 4.5 in
- Probe Type High-Accuracy Fluid Immersion RTD Sensors
- Process Connection Size 1/8 in
- Process Connection Type NPT Male
- Sensing Element 100 Ω Class “A” DIN Platinum Element
- Series ID RTD-810-Series
- Sheath Material 304 Stainless Steel
- Temperature Probe Style Immersion Probe
- Temperature Sensor Type RTD
- Wire Gauge 26 AWG
- Wire Type Stranded
Supported Applications
The Omega RTD-810 Series consists of high-accuracy fluid immersion resistance temperature detector (RTD) sensors designed for monitoring temperature in fluid and pressurized applications. These probes feature a stainless steel probe stem and mounting fitting, configured with lead wire outputs to connect directly to instrumentation.
Operating Conditions & Performance
The series utilizes 100 Ω Class "A" DIN sensing elements. The measurement range extends from -200 °C to 750 °C for the sensor element, with a maximum cable temperature of 232 °C. Accuracy is specified as ±0.15°C @ 0°C in accordance with IEC Class A standards.
Physical dimensions include a probe diameter of 3 mm (1/8 in) and a stem length of 114 mm (4 1/2 in). The process connection is provided via a 1/8 NPT thread. Electrical construction follows a 3-Wire configuration for connecting to most instruments.
Configuration Options
The RTD-810 Series offers configurable termination options and accessories to suit specific installation requirements:
- Sensing Element: All models feature a 100 Ω Class "A" DIN element.
- Cable Length & Insulation: Standard configuration includes a 1 m (40 in) long PFA insulated cable.
- Connector Types: Available with MTP-U-M Male connector, OTP connector, or TA3F connector. Specific mating connectors include the MTP-U-F and OTP-U-F models.
- Cable Clamps: Options include PCLM-MTP for MTP configurations and PCLM for other terminations.
The series supports additional accessories, including the PUK-2T DIN rail terminal block and the HH804U high accuracy Pt100 RTD thermometer. Female mating connectors are sold separately.
Key Product Differences
Variants within the RTD-810 Series differ primarily by their termination style, as indicated in the model number guide: RTD-810 - <Sensing Element> - <Connector Type>. Specific configurations include:
- RTD-810: Equipped with an MTP Connector.
- RTD-810-OTP: Features an OTP connector on the PFA cable.
- RTD-810-TA3F: Includes a TA3F connector.
All listed variants maintain identical sensing element specifications, maximum temperature ratings of 750 °C (cable 232 °C), and the same stainless steel wetted materials. Other options are available through DwyerOmega.
PDFs & Manuals
Accessories
cables
3-Prong Mini flat pin Connector for Thermocouple, RTD and 3-Wire Thermistor
TWD249 / each
0 In Stock
3-Prong Standard Size Round Pin Connector for Thermocouple, RTD and 3-Wire Thermistor
TWD578 / each
661 In Stock