Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
Series-2000-SP
Magnehelic® Differential Pressure Gage, Setpoint indicator Red LED, Adjustable
Series-2000-SP
From
TWD
10,916
Product Overview
- Accuracy Detail ± 2% (-HA model ± 1) of FS (± 3% (-HA ± 1.5%) on -0, -100PA, -125PA, -10MM and ± 4% (-HA ± 2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
- Additional Features 1 LED Set Point Indicator
- Dial Dia 4 in
- Dual false
- Enclosure Ratings IP67
- Materials Aluminum, Acrylic
- Materials, Wetted Consult Factory
- Media Compatibility Clean dry air / inert gas, HVAC / room air, Inert / non-reactive gases, Helium, Nitrogen, Non-Corrosive Dry Gases
- Mounting Orientation Vertical Diaphragm
- Operating Temperature, Max 140 °F
- Operating Temperature, Min 20 °F
- Pressure Limits -20 inHg to 80 psi
- Measurement Pressure, Min 0 inH₂O
- Measurement Pressure Type Differential
- Process Connection Note 1/8˝ female NPT duplicate high and low pressure taps - one pair side and one pair back.
- Process Connection Size 1/8 in
- Process Connection Type NPT Female
- Safety Features Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.
- Series ID Series-2000-SP
- Weight 510 g
Series 2000-SP Magnehelic® Differential Pressure Gage has a bright red LED on the right of the scale showing when setpoint is reached. Field adjustable from gage face, unit operates on 12-24 VDC. Requires MP or HP style cover and bezel.
NIST CALIBRATION available in Product Configurator.
PDFs & Manuals
Accessories
accessories
3-way vent valve, plastic, 1/8" NPT to 1/4" metal tubing, 80 psi rating, replaces former Model A-310 (brass). 2.3" x .8" x .1", .10 lb.
TWD952 / each
0 In Stock
Plastic carrying case for Magnehelic® gage of standard range, except high pressure connection, includes 9 ft (2.7m) of 3/16" ID rubber tubing, stand-hang bracket & terminal tube with holder. 9.1" x 7.4" x 3.6", 1.30 .lb
TWD2,560 / each
0 In Stock
Air filter kit - adapts any standard Magnehelic® gage for use as an air filter gage. Includes aluminum surface mounting bracket with screws, (2) 5 ft (1.5 m) lengths of 1/4" aluminum tubing, (2) static pressure tips & (2) molded plastic vent valves.
TWD1,992 / each
0 In Stock
consumables
installation hardware
Mounting bracket flush mount Magnehelic® gage in bracket. Bracket is then surface mounted . Steel with gray hammertone epoxy finish. 6.3" x 7.7" x 4.0", 1.30 lb.
TWD1,662 / each
0 In Stock
Flat aluminum bracket for flush mounting Magnehelic® gage. 6.8" x 6.0" x .1", .35 lb.
TWD1,466 / each
0 In Stock
Surface mounting bracket, use with Photohelic® switch/gage on horizontal or vertical surfaces, also for Capsu-Photohelic® switch/gage on vertical only. Also Magnehelic® -MP, -HP models.
TWD2,169 / each
0 In Stock
Flush mount kit for Magnehelic® gages (Magnehelic® sold separately)
TWD1,124 / each
0 In Stock
Stainless steel flush mounting kit for the Magnehelic® gages (Magnehelic® sold separately)
TWD5,257 / each
0 In Stock
