Skip to search Skip to main content Skip to navigation

Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.

LDX-2-LVDT-Sig-Cond

Item# LDX-2-LVDT-Sig-Cond

In Stock

Lead Time (If not in stock): 0 week

Product Specs

<< See all Product Models
Brand
Accuracy ± 0.02 %
Approvals CE
Electrical Output 4 to 20 mA
Enclosure Ratings IP65, NEMA Type 12
Gain Range 3.5 to 1 switched, 5 to 1 adjustable
Height 120.65 mm
Input Electrical Connection Screw terminals; access through 2 cable ports for wires 1 to 5 mm (0.04 to 0.2") diameter
Input Noise 0 to 1.5 Hz: 1.4 µVRMS (RTI)
Input Range 30 to 530 mV/V
Input Type Voltage
Length 54.86 mm
Mounting Through holes in base by 2 screws and nuts, can be mounted to DIN 46277-1 rail
Non-Linearity Better than 0.02%
Number of Wires 2, 3
Operating Temperature, Max 70 °C
Operating Temperature, Min 0 °C
Output Detail Output Current: 4 to 20 mA 2-wire or 0 to 20 mA 3-wire. Output Ripple:<50 µA p-p @ 10 kHz Output Filter: Cutoff frequency -3 dB @ 25 Hz second-order linearity: <0.02%
Protection Oscillator Protection: Open and short circuit protected, Output Protection: Open and short circuit protected, Supply Protection: Reverse polarity protected
Sensitivity Transducer : 30 to 530 mV/V
Sensor Excitation 0.9 Vrms @ 5 kHz nominal, 13 kHz switchable
Series ID LDX-2-LVDT-Sig-Cond
Storage Temperature, Max 80 °C
Storage Temperature, Min -40 °C
Supply Power Type DC
Supply Voltage 13 to 48 Vdc, up to 30 mA
Temperature Coefficient Zero: Better than 0.01% FS/°C;Gain: Better than 0.01% FS/°C
Weight 220 g
Width 80 mm
See All Specs Show Less
LVDT Signal Conditioner, Loop Powered for AC LVDT LDX-2-LVDT-Sig-Cond LDX-2-LVDT-Sig-Cond
en-TW
en_TW
Save Configuration