Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
Back To Top
[+]
Tuning Fork Switches
Added to Your Shopping Cart
The piezoelectric component produces the resonation on the fork. When the fork comes into contact with a material, the fork will release some frequency signal as feedback
| Product Number | Switch Type |
|---|---|
|
|
PNP
|
The LTU-2000 Tuning Fork Sensors are point level switches that are designed to detect low or high levels of liquids and is based on the vibrating tuning fork principle.
| Product Number | Electrical Connection | Materials | Probe Length | Process Connection Size | Supply Voltage |
|---|---|---|---|---|---|
|
|
Cable Gland with Screw Terminal block
|
Glass-Filled Nylon
|
3.125 in
|
3/4 in
|
20 to 60 Vdc, 20 to 264 Vac
|
|
|
DIN 43650 A (solenoid valve)
|
316 Stainless Steel
|
3.125 in
|
3/4 in
|
85 to 264 Vac / 50 Hz
|
The LTU-101A-R consists of a sensor with dual tuning forks vibrated at a high frequency. As the tuning fork is covered by liquid, a shift in frequency activates the relay.
| Product Number | Process Connection Type |
|---|---|
|
|
NPT Male
|
|
|
BSPP Male
|
The Tuning Fork Level Switch for Powders offers reliable performance without calibration, designed to be immune to vibrations for consistent level detection.
| Product Number | Probe Length |
|---|---|
|
|
0 in
|
|
|
6 in
|
|
|
18 in
|
Tuning Fork Switches
Tuning Fork Switches detect level by monitoring a vibrating fork or rod as ...