Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
LCCD
Cellules de charge en forme de S protégées environnementalement IP67
IP67 Environmentally Protected S-Beam Load Cells
Models In Stock
- Environmentally Protected to IP67
- All Stainless Steel for Industrial Environments
- 5 Point Calibration with 59 kOhm Shunt Cal Data
- Tension Calibration Standard
LCCD
From
TWD
27,888
Models In Stock
Product Overview
- 5-Point Calibration 0%, 50%, 100%, 50%, 0%
- Bridge Resistance 350 Ω
- Cable Length 20 ft
- Calibration Option 5 POINT NIST
- Creep in 20 min 0.0003
- Electrical Connection Cable
- Electrical Output 3 mV/V
- Enclosure Ratings IP67
- Force Type Compression, Tension
- Hysteresis 0.0005
- Interchangeability 0.0025
- Load Cell Type S-beam
- Materials 17-4 PH Stainless Steel
- Operating Temperature, Max 66 °C
- Operating Temperature, Min -18 °C
- Overload, Max 300% FS
- Process Temperature, Max 66 °C
- Process Temperature, Min -18 °C
- Repeatability 0.0001
- Safe Overload 150% FS
- Series ID LCCD
- Supply Power Note 10 Vdc, 15 Vdc maximum
- Supply Voltage 10 Vdc
- Thermal Span Effect 0.0015% rdg/°C
- Thermal Zero Effect 0.0027% FS/°C
- Wire Gauge 22 AWG
- Wiring/Connector Table Green: (+) Output; White: (-) Output; Black: (-) Input; Red: (+) Input
- Zero/Balance Error 0.01
Supported Applications
The Omega LCDC/LCMCD series consists of environmentally protected S-beam load cells designed for tension and compression applications. These units are engineered to measure force across a broad capacity envelope, ranging from 0-25 lb to 0-20,000 lb (0-10 kgf to 0-5000 kgf). The series is offered in both standard inch-pound models (LCDC) and metric kilogram-force models (LCMCD), providing a single solution for diverse measurement requirements.
Operating Conditions & Performance
The LCDC/LCMCD load cells operate within an ambient temperature range of -18 to 66°C (0 to 150°F). Constructed from 17-4 PH stainless steel, the series carries an IP67 enclosure rating for environmental protection. Electrical performance is defined by a bridge resistance of 350 Ω nominal and an output signal of 3.0 mV/V ±0.25%. The units require an excitation voltage of 10 Vdc (15 Vdc maximum).
Accuracy specifications documented for the series include:
- Linearity: 0.03% FS
- Hysteresis: ±0.05% FS
- Repeatability: 0.01% FS
- Creeep in 20 min: 0.03% FS
- Zero Balance: 1% FS
The series supports a maximum safe load of 150% and an ultimate load limit of 300%. Thermal effects are specified as 0.0027% FS/°C for zero and 0.0015% rdg/°C for span.
Configuration Options
The series is available with a standard electrical connection consisting of a 6 m (20') 4-conductor shielded 22-gage wire PVC cable. Process connections feature A Threads on both ends, with thread sizes varying by capacity to match the load rating.
Capacity and Thread Configurations
The series supports multiple capacities paired with specific UNF-2B or metric threads:
- Standard (lb): Capacities from 25 lb to 20,000 lb utilize thread sizes ranging from 1/4-28 UNF-2B up to 1-1/4-12 UNF-2B.
- Metric (kgf): Capacities from 10 kgf to 5,000 kgf utilize thread sizes ranging from M8 x 1.25-6H up to M20 x 1.5-6H.
Accessories and Options
The series is compatible with various load button models (LBC) and rod end models (REC), which are sold separately. Specific accessory compatibility includes:
- Load Button Models: LBC-014, LBC-038, LBC-012, LBC-034, LBC-100, MLBC-M8, MLBC-M12, MLBC-M20.
- Rod End Models: REC-014M, REC-038M, REC-012M, REC-034M, REC-100M, REC-114M, MREC-M8M, MREC-M12M, MREC-M20M.
Each unit includes a 5-point NIST-traceable calibration certificate and shunt data. The series is compatible with meters such as the DP25B-S, DP41-S, and DPIS (noting that the DPIS meter is suitable for one-direction measurement only).
Key Product Differences
The LCDC/LCMCD series distinguishes between standard inch-pound models (LCDC) and metric kilogram-force models (LCMCD). Model numbers follow a specific guide: LCDC/LCMCD - <CAPACITY>. For example, an LCDC-1K denotes a 1000 lb capacity load cell, while LCMCD-100 indicates a 100 kgf capacity. Physical dimensions (H, W, T1, T2) vary by capacity and thread size as detailed in the specification tables.
