Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
SP-001-2-Series
Smart IR Sensor -70 °C to 380 °C Temperature
This item has been discontinued. We are retiring the Omega Link product line and transitioning to SensoScientific — the industry’s most advanced wireless monitoring platform, now a key part of our unified DwyerOmega portfolio.
SP-001-2-Series
From
TWD
8,497
Product Overview
- Accuracy ± 4 °C (± 7.2 °F)
- Accuracy Detail Temperature Accuracy @ Ambient of 0 to 50°C(32 to 122°F): 1°C (1.8°F) or 1% of reading, whichever is greater Accuracy Over Entire Ambient Operating Range: 4°C (7.2°F) or 3% of reading, whichever is greater
- Approvals CE, UKCA
- Configuration Configurable via SYNC configuration software
- Diameter 12 mm
- Emissivity, Max 0.01 to 1.00
- Enclosure Material Stainless Steel
- Enclosure Ratings IP67, NEMA Type 6
- Length 67 mm
- Measurement Type Temperature
- Number of Channels 2
- Operating Temperature, Max 85 °C
- Operating Temperature, Min -40 °C
- Process Connection Type Internal
- Process Temperature, Max 380 °C
- Process Temperature, Min -70 °C
- Relative Humidity 0 to 95% RH
- Repeatability Temperature: 1°C
- Repeatability Note Temperature: 1°C (1.8°F) or 1% of reading
- Series ID SP-001-2-Series
- Software Compatible with OEG and SYNC configuration software
- Spectral Response, Max 14 µm
- Spectral Response, Min 5.5 µm
- Supply Power Type DC
- Supply Voltage 3.3 Vdc
- Temperature Response Time 1 sec
- Thread Diameter 12 mm
- Thread Length 33.5 mm
- Vibration 10 Gs from 10 Hz to 500 Hz
- Weight 35 g
Supported Applications
The Omega SP-001/SP-002 Smart IR Sensor is an ultra-miniature, non-contact infrared temperature probe for surface measurement from -70 to 380°C (-94 to 716°F). As part of the Omega Link ecosystem, it targets non-contact monitoring of moving, hard-to-reach, or otherwise inaccessible surfaces in data-acquisition, IIoT, and wireless sensing deployments.
It measures infrared surface temperature across a wide range of materials, including paper, thick plastics, rubber, food and organic materials, painted metals, and dusty, rusty, or oily surfaces.
Operating Conditions & Performance
The sensor reads infrared surface temperature from -70 to 380°C (-94 to 716°F) with a 1 second response time. Accuracy is 1°C (1.8°F) or 1% of reading, whichever is greater, over a 0 to 50°C ambient, and 4°C (7.2°F) or 3% of reading across the entire ambient range; repeatability is 1°C (1.8°F) or 1% of reading.
- Power: 3.3 VDC, 0.05 W maximum.
- Digital interface: I2C (SCL/SDA), two discrete I/O signals (DIO 0, DIO 1), and an interrupt (INTR), through a modular M12 8-pin male connector.
- Ambient range: -40 to 85°C (-40 to 185°F); humidity less than 95% RH, non-condensing.
- Enclosure and durability: stainless steel housing rated NEMA 6 / IP67, with vibration tolerance of 10 Gs from 10 Hz to 500 Hz.
The probe measures 12 mm in diameter and 67 mm in length, and weighs 35 g (1.2 oz). The series carries CE and UKCA approvals.
Configuration Options
Model configuration follows SP-00x-<Discrete I/O Pins>, where the base number sets the field of view (FOV) and the suffix sets the discrete I/O pin configuration:
- SP-001 vs SP-002: differ by field of view.
- -0 vs -1 suffix: differ by discrete I/O pin configuration.
All variants share the same -70 to 380°C measurement range, stainless steel M12 form factor, and Omega Link smart-interface capability, and can act as an edge controller with autonomous decision-making when paired with an Omega Link wireless gateway.
Key Product Differences
The series is offered in four models:
- SP-001-0
- SP-001-1
- SP-002-0
- SP-002-1
Compatible accessories include M12 cordsets and splitters (for example DM12CAB-8-1, DM12CAB-8-3, and DM12CAB-8-5, and the M12.8-T-SPLIT) and the SP-001-MB mounting bracket.
PDFs & Manuals
Software & Drivers
Accessories
cables
Smart Probe M12 8 pin sheilded T Splitt
TWD1,670 / each
0 In Stock