Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
STAC6-Srs-Stepper-Drives
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Amplifier Type | MOSFET, Dual H-Bridge, 4 Quadrant |
| Control Characteristics | Non-Volatile Storage: Configurations are stored in FLASH memory Step and Direction Inputs: Optically Isolated: 5 to 12V; minimum pulse width = 200 ns; maximum pulse frequency = 2 MHz Speed Range: Depends upon selected resolution; amplifier is suitable for speeds up to 133 rps Resolution: Software selectable from 200 to 51,200 steps/rev in increments of 1 step/rev Encoder Option: Differential line receivers suitable for 200 KHz or greater |
| Current Rating | 0.5 to 6.0 A in 0.01 A increments |
| Data Interface | RS232, RS485 |
| Input Voltage | 5 to 12 V |
| Motion Precision & Smoothness | Speed Range: Depends upon selected resolution; amplifier is suitable for speeds up to 133 rps |
| Operating Temperature, Max | 55 °C |
| Operating Temperature, Min | 0 °C |
| Process Connection | N/A |
| Protection | Over voltage, under voltage, over-temp, external output shorts (phase-to-phase, phase-to-ground), internal amplifier shorts |
| Relative Humidity | 90% non-condensing |
| Resolution | Software selectable from 200 to 51,200 steps/rev in increments of 1 step/rev |
| Series ID | STAC6-Srs-Stepper-Drives |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Accessories
accessories
USB TO SERIAL INTERFACE
/ each
0 In Stock