Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
WT-2000-Wind-Tunnel
5 m/s Open Loop Benchtop Wind Tunnel w/ 11.3 in x 17 in x 3.25 in Test Chamber
WT-2000-Wind-Tunnel
From
Product Overview
- Control Box Dimensions 16 L x 13.8 W x 6.7 H cm
- Data Interface RS232
- Fuse Rating 2A Fast Acting 5x20mm Cartridge Type
- Linear Flow Rate, Min 0 m/s
- Motor Speed 3800 RPM
- Motor Voltage 12 Vdc
- Motor Voltage Note 12 Vdc @ 0.47A ea (5.6W ea) x 4
- Noise Level Range 61 dBA
- Operating Humidity 0 to 80% RH
- Operating Temperature, Max 45 °C
- Operating Temperature, Min 5 °C
- Series ID WT-2000-Wind-Tunnel
- Software WT-2000 User Software
- Supply Voltage 90 to 264 Vac
- System Requirements • Pentium Class or higher processor • Hard Drive Space: 30 MB • Ram: 256 MB • 1 Available USB Port • 1 CD-ROM Drive
- Test Section Dimensions 43 x 8.25 cm cross section (17" x 3.25")
- Weight 12.48 kg
- Weight Note Wind Tunnel: 12.48 kg (27.5 lb) Electrical Control Box: 0.9 kg (2 lb)
- Width 18.4 cm
Supported Applications
The Omega WT-2000 Thermal Wind Tunnel is designed to produce variable flow rates inside a rectangular test chamber with a cross-sectional area of 17" by 3 ¼". The device is recommended for testing circuit boards, heat sinks, and other temperature-related products.
Operating Conditions & Performance
The WT-2000 features an electronic control unit that manages four compact, high-power density fans to generate airflow within the test chamber. Velocity can be controlled via simple push-button user input or through free PC-based software control connected via a USB cable.
Configuration Options
The series supports flexible fan operation configurations:
- Fans can be controlled independently.
- Fans can be operated in groups of two.
- All four fans can be run together to produce a wide range of different air flows.
Physical dimensions for the unit are listed as 31" [80.45] length, 28.1" [71.35] height, and 17.1" [43.50] width.
Key Product Differences
The WT-2000 is supplied as a benchtop unit with the specified rectangular test chamber dimensions. The product carries ISO 9001 Certified Corporate Quality designations for facilities in Stamford, CT and Manchester, UK. A warning note states that these products are not designed for use in, and should not be used for, human applications.
PDFs & Manuals
Software & Drivers