Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
OMPBD7D-P
22 mm Indicating Lights, NEMA4/4x/13 IP66, Wash Down Environments
- Optically Enhanced Lens Style
- Complete One Piece Panel Mounting–Bulb Included
- Incandescent or LED Bulbs Available for Multiple Voltages
- One Piece Part Number for Easy Ordering
Product Overview
- Accessory Type N/A
- Approvals Certifications: UL, CSA, CCC, CE Conformity to Standards-CE Marked: UL 508, EN 60947-1, EN 60947-5-1, EN 60947-5-5 Terminal Identification: EN/IEC 60947-1
- Contact Blocks N/A
- Mechanical Life 2,000,000 Cycles
- Mounting Torque (Front-of-Panel) N/A
- Operating Forces (Front-of-Panel) N/A
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -25 °C
- Pushbutton Material N/A
- Pushbutton Size N/A
- Relative Humidity 50 to 95% RH
- Relative Humidity Note 50 to 95% RH from 25 to 60˚C (77 to 140˚F)
- Series ID OMPBD7D-P
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Switch Type N/A
- Thermal Current 5 A max
- Tightening Torque 0.7 to 0.9 Nm (6 to 8 lb-in)
- Vibration and Shock Vibration Assembled to Panel: Tested at 10 to 2000 Hz, 1.52 mm displacement (peak-to-peak) max/10 G max for 3 hr duration, no damage;Shock: Tested at 1⁄2 cycle sine wave for 11 ms; no damage at 100 G
- Wire Gauge 18 to 14 AWG
- Wire Gauge Note Screw terminal : #18 to 14 AWG (0.75 to 2.5 mm2), max (2) #14 AWG, uses same size wire only
The D7D Monolithic Series indicating lights provide a cost-effective range for 22.5 mm signal control devices. Constructed from high-quality industrial-grade thermoplastic, these pilot lights feature a unique one-piece body that incorporates both the front and rear panel components and the bulb into one element for quick assembly and ease of ordering.
These indicating lights are corrosion and UV resistant and meet the requirements for NEMA Type 4/4x/13 and IP65/66 sealing. These indicating lights incorporate a low mounting profile and have an optically enhanced lens. The integrated LED bulbs have superior shock and vibration ratings, a life rating of up to 100,000 hours, and leakage current protection up to 3 mA. LED bulbs are available in 24 Vac/dc, 120, and 240 Vac. The incandescent bulbs are front replaceable and are available in 6, 12, 24, 48, and 120 volts.
D7D-P0N3, D7D-P0N2, D7D-P0N5, D7D-P3N2, D7D-P3N3, D7D-P3N5, D7D-P4N2, D7D-P4N3, D7D-P4N5, D7D-P5N2, D7D-P5N3, D7D-P5N5
PDFs & Manuals