Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
LC8200
2 in OD Through-Hole, Compression Load Cells
- 5 Point NIST Traceable Calibration with
59 kOhm Shunt Cal Data - Low Profile
- All Stainless Steel Construction
- Rugged Industrial Design
Product Overview
- 5-Point Calibration 0%, 50%, 100%, 50%, 0%
- Calibration Option 5 POINT NIST
- Electrical Connection Cable
- Electrical Output 2 mV/V
- Force Type Compression
- Full Scale Deflection 0.003 in
- Input Resistance 360 Ω min
- Linearity ± 0.5%
- Load Cell Type Through Hole
- Materials 17-4 PH Stainless Steel
- Operating Temperature, Max 121 °C
- Operating Temperature, Min -54 °C
- Outer Diameter 2 in
- Output Resistance 350 ± 5 Ω
- Overload, Max 300% FS
- Process Temperature, Max 71 °C
- Process Temperature, Min 16 °C
- Repeatability ± 0.1%
- Safe Overload 150% FS
- Series ID LC8200
- Supply Power Note 10 Vdc, 15 Vdc maximum
- Supply Voltage 10 Vdc
- Thermal Span Effect ± 0.036% rdg/°C
- Thermal Zero Effect ± 0.009% FSO/°C
- Wiring/Connector Table Green: (+) Output; White: (-) Output; Black: (-) Input; Red: (+) Input
- Zero/Balance Error ± 2%
Supported Applications
The Omega LC8200 series consists of compact through-hole compression load cells designed for force measurement applications. These sensors feature a low-profile, all-stainless steel construction intended for rugged industrial environments where space is constrained or integration into existing structures requires a central bore.
Operating Conditions & Performance
The LC8200 series operates within an ambient temperature range of -54 to 121°C (-65 to 250°F). Measurement capabilities span from 0-5 lb (0-2.3 kgf) up to 0-10,000 lb (0-4537 kgf), with a nominal output signal of 2 mV/V and an excitation voltage requirement of 10 Vdc (maximum 15 V). Performance specifications include an accuracy class of ±0.5% FSO and repeatability of ±0.1% FSO.
Physical dimensions vary by capacity range: units rated for 5 to 100 lb have a height of 9.4 mm (0.37"), while those rated from 250 to 10,000 lb feature a height of 16 mm (0.63"). All models maintain an outer diameter (OD) of 51 mm (2.00") and are constructed from 17-4 PH stainless steel.
Configuration Options
The series offers extensive configurability through selectable inside diameters (ID) paired with specific capacity ratings to accommodate various mounting requirements or pass-through needs.
- Inside Diameters: Available ID codes include 125, 188, 250, 375, 500, 625, 750, 875, and 1.00 (representing inches).
- Capacities: Configurable from 5 lb to 10,000 lb.
- Cable Assembly: Each unit includes a 1.5 m (5') 4-conductor shielded cable with the following wire connections: Green (+Output), White (-Output), Black (-Input), and Red (+Input).
- Calibration & Compliance: Units come complete with 5-point NIST-traceable calibration, a 59 kΩ shunt resistor for data verification, and are RoHS compliant.
The model number follows the format LC8200-[ID]-[CAPACITY], such as LC8200-125-5 or LC8200-375-10K. Metric configurations are available upon consultation with engineering.
Key Product Differences
Variation within the series is defined by the combination of inside diameter and load capacity, which dictates both the model number and physical height profile. Lower capacities (5 to 100 lb) utilize a shorter form factor (9.4 mm / 0.37"), whereas higher capacities (250 to 10,000 lb) require an increased height of 16 mm (0.63"). Specific ID options are not available for every capacity; availability is determined by the intersection of the selected diameter and load rating as documented in the series specification tables.
PDFs & Manuals
