Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
DPF700
1/8 DIN 6-Digit Rate Meter/Totalizer
- Measures Rate from 0.5 Hz to 30 kHz
- Totalizes Up or Down from -99,999 to 999,999 or Acts as Accumulating Stopwatch
- 6-Digit, 7-Segment LED, 14.2 mm (0.56')
- Sensor Excitation Output
Product Overview
- Accuracy ± 0.5 %
- Accuracy Detail ±0.5 LSD Total, 0.01% of the rate ±1.5 LSD
- Additional Features 1 Rate Measurement Technique 1/x
- Control Output Optional
- Cutout Dimensions 3.62 x 1.73 in
- Decimal Selection Autoranging, User Selectable
- Display Color Red
- Display Type LED
- Form factor 1/8 DIN
- Frequency 30 kHz
- Frequency Response Gate Time: 0.30 sec
- Front Panel Dimensions 4.437 x 2.625 in
- Input Note TTL, CMOS, NPN open collector, contact closure and magnetic pickup compatible
- Input Type Frequency
- Memory Non-Volatile Memory
- Mounting Orientation Panel Mount
- Number of Digits 6
- Number of Inputs 1
- Panel Depth 3.6 in
- Pulse Input Note Low Level: 25 mV rms; Max Level: 60 V; Trigger Slope: Selectable by DIP switch
- Series ID DPF700
- Setpoint Two, Optional
- Supply Power Type AC
- Weight 1 lb
Supported Applications
The Omega DPF700 series is a programmable digital meter designed as a Ratemeter/Totalizer/Controller. It measures rate from 0.5 Hz to 30 kHz and totalizes up or down from -99,999 to 999,999 or acts as an accumulating stopwatch. The device supports line frequency measurement and Revolutions per Minute (RPM) measurement examples.
Operating Conditions & Performance
The DPF700 features a 6-digit, 7-segment red LED display with 14.2 mm H height. Accuracy is specified as ±0.5 LSD of total and 0.01% of the rate ±1.5 LSD. The gate time for rate measurement is 0.30 sec using a 1/x technique.
Input characteristics include:
- Type: Single input compatible with TTL, CMOS, NPN open collector, contact closure, and magnetic pickup (selected by DIP switch; non-isolated).
- Level: Maximum 60V; minimum 25 mV rms.
- Frequency: 30 kHz maximum.
- Excitation: Regulated at 5.0, 8.2, or 12.4V selected by DIP switch (100 mA maximum).
The meter operates on a power supply of 115 Vac/7.5 to 13 Vdc powered (DPF701) or 230 Vac/7.5 to 13 Vdc powered (DPF702). Physical dimensions are 48 H x 96 W x 152 mm D (1.9 x 3.8 x 6") with a weight of 454 g (1 lb).
Configuration Options
The series offers configurable options for output, control, and mounting:
- Power Supply Models: DPF701 (115 Vac/7.5 to 13 Vdc) or DPF702 (230 Vac/7.5 to 13 Vdc).
- Option Boards (Field Installable):
- Analog output board: DPF700-A3.
- Dual 5A relay board: DPF700-R.
- RS232 output board: DPF700-232.
- Accessories:
- 1/8 DIN bumper band (DP40-BB-(*)).
- 1/8 DIN panel punch (DPP-5).
The analog output is scalable to 4 to 20 mA, 0 to 20 mA, or 0 to 10 V. The dual relay option provides two Form C relays rated at 5A. RS232 communication and setpoints are available as optional features.
Key Product Differences
The primary distinction between models is the power supply voltage: DPF701 supports 115 Vac/7.5 to 13 Vdc, while DPF702 supports 230 Vac/7.5 to 13 Vdc. Both share identical measurement ranges and display specifications.
Optional boards modify the meter's functionality:
- The DPF700-A3 adds analog output capability (4–20 mA, 0–20 mA, or 0–10 V).
- The DPF700-R provides dual 5A Form C relay outputs.
- The DPF700-232 enables RS232 communication output.
Mounting accessories include the DP40-BB-(*) bumper band, available in colors specified by code: GY (gray), YL (yellow), BK (black), BL (blue), GR (green), RD (red), OR (orange), VL (purple), or WH (white). The standard panel cutout is 45 H x 92 mm D (1.8 x 3.6").
