Besoin d'aide? Appelez-nous: 1-800-663-4209
CND3-Series
Contrôleurs PID de température et de processus DIN 1/16, 1/8 et 1/4
1/16, 1/8, and 1/4 DIN Temperature and Process PID Controllers
Modèles en stock
- Modèle de base à partir de 80 $
- Temps d’échantillonnage rapide de 0,1 s
- Détection de déconnexion du chauffage
- Tous les modèles 1/4, 1/8, 1/16 DIN certifiés UL/cUL
CND3-Series
À partir de
TWD
8,635
Modèles en stock
Aperçu du produit
- Altitude maximale 2000 m
- Mode de contrôle Contrôle PID ; contrôle flou ; auto-réglage ; réglage manuel ; contrôle marche-arrêt
- Type d'affichage Remarque Affichage LCD. Valeur du processus (PV) : couleur jaune, point de consigne (SV) : couleur verte, Affichage double 3,5 chiffres Précision d'affichage : 0 ou 1 chiffre à droite de la virgule (sélectionnable)
- Type d'entrée Thermocouple ; RTD ; mA ; tension
- Type de mesure Courant ; température ; tension
- Plage de mesure Type K : -200 ~ 1300°C, Type J : -100 ~ 1200°C, Type T : -200 ~ 400°C, Type E : 0 ~ 600°C, Type N : -200 ~ 1300°C, Type R : 0 ~ 1700°C, Type S : 0 ~ 1700°C, Type B : 100 ~ 1800°C, Type L : -200 ~ 850°C, Type U : -200 ~ 500°C, Type TXK : -200 ~ 800°C, RTD (JPt100) : -20 ~ 400°C, RTD (Pt100) : -200 ~ 850°C, Résistance (Ni120) : -80 ~ 300°C, Résistance (Cu50) : -50 ~ 150°C, Entrée tension analogique (0~5V) : -999~9999, Entrée tension analogique (0~10V) : -999~9999, Entrée tension analogique (0~20mA) : -999~9999, Entrée tension analogique (4~20mA) : -999~9999, Entrée tension analogique (0~50mV) : -999~9999
- Nombre d'entrées 1
- Température de fonctionnement, max 50 °C
- Température de fonctionnement, min 0 °C
- Signal de sortie Aucun
- Rampe et maintien Rampes multiples et trempage
- Humidité relative 35 % ~ 80 % HR (sans condensation)
- Type RTD Capteur Pt ou Jpt 100 Ω ; Pt100 à 3 fils
- Fréquence d'échantillonnage 10 Hz (10 mises à jour/seconde)
- Note sur la fréquence d'échantillonnage Entrée analogique : 0,1 s/scan ; Thermocouple ou RTD en platine : 0,1 s/scan
- ID de série CND3-Series
- Résistance aux chocs Max. 300m/s², 3 fois dans chacun des 3 axes, 6 directions
- Température de stockage, max 65 °C
- Température de stockage, min -20 °C
- Approvisionnement Remarque 80 ~ 260VCA 50/60Hz; 24VCA 50/60Hz ± 10 %; 24 VCC ± 10 %
- Type de thermocouple J ; K ; T ; E ; N ; R ; S ; U ; B ; L ; TXK
- Résistance aux vibrations 10 à 55Hz, 10m/s² pendant 10 min, dans les directions X, Y et Z
Supported Applications
The Omega CND3 Series comprises temperature and process PID controllers designed for monitoring temperatures in various environments. As an open-type unit, the series is intended for integration into control systems where operators require a high-resolution LCD display to monitor Process Value (PV) and Set Point (SV). The controller supports applications requiring precise regulation via multiple sensor types including thermocouples, platinum RTDs, resistance sensors, and analog inputs.
Operating Conditions & Performance
The CND3 Series operates within an ambient temperature range of 0°C ~ +50°C with a relative humidity rating of 35% ~ 80% RH (non-condensing). Storage conditions are specified as -20°C ~ +65°C. The unit features a sampling rate of 0.1 sec/per scan for analog inputs, thermocouples, and platinum RTDs. Display accuracy is selectable to show either an integer value or one digit to the right of the decimal point.
Electrical specifications include power consumption up to 8VA max. The controller withstands vibration resistance of 10 to 55Hz at 10m/s² for 10 minutes in X, Y, and Z directions, and shock resistance of Max. 300m/s² (3 times in each 3 axes, 6 directions). Maximum operating altitude is listed as 2000m.
Configuration Options
The series offers a configurable envelope across panel sizes, input types, control modes, and output configurations. Selection logic follows the model number guide: CN <1> <2> D3-<3>-<4>-<5>-<6>-<7>-<8>.
Panel Sizes
- Code 20: 48x48 mm (1/16 DIN)
- Code 30: 72x72 mm
- Code 40: 48x96 mm (1/8 DIN)
- Code 60: 96x96 mm (1/4 DIN)
Sensor Inputs & Measurement Ranges
The controller accepts the following input types with selectable temperature units of °C or °F:
- Thermocouple: K, J, T, E, N, R, S, B, L, U, TXK
- 3-wire Platinum RTD: Pt100, JPt100
- Resistance: Cu50, Ni120
- Analog Input: 0 ~ 5Vdc, 0 ~ 10Vdc, 0 ~ 20mA, 4 ~ 20mA, 0 ~ 50mVdc
Control Modes & Outputs
Available control modes include PID, PID program control (Ramp/Soak), FUZZY, Self-tuning, Manual, and On/OFF. The series supports up to two output groups with the following signal types:
- Relay Output: 250Vac, 5A resistive load
- Voltage Pulse Output: 12Vdc -10%~+20%, Max. output current 40mA
- DC Current Output: 4 ~ 20mA (Load resistance: Max. 500Ω)
- Linear Voltage Output: 0 ~ 10Vdc
Optional features include Event Inputs and CT measure inputs for current measurement using external transformers compliant with IEC-61010-2-032.
Power Supply & Connections
- Voltage: 80 ~ 260Vac 50/60Hz; 24Vac 50/60Hz ±10%; 24 Vdc ±10%
- Terminals: Recommended solder-less terminals (M3 screw, width 5.8 mm)
Key Product Differences
Variants within the CND3 Series are distinguished by panel dimensions and output configurations encoded in the model number. The first digit following "CN" indicates the DIN size (e.g., CN04 for 1/8 DIN, CN16 for 1/4 DIN). Subsequent codes define the primary control output type (Relay 'R', Voltage Pulse 'V', Current 'C', Linear Voltage 'L') and secondary alarm or auxiliary outputs. Power supply options are designated by code A (80 ~ 260Vac) or D (24Vac/Vdc), with specific model restrictions noted for the DT330 72x72 variant regarding DC support.
The series includes configurations supporting dual output groups, allowing independent selection of control and alarm functions. Optional communication capabilities include RS-485 interfaces and event input channels configured via optional codes in positions 6 through 8 of the model string.
PDF & Manuels
Logiciels & Pilotes
