Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
CT6100-Series
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.2 % |
| Accuracy Detail | Thermocouple: ±0.25%, RTD, Low Range (-200 to 200°C): ±0.2°C, RTD, High Range (200 to 850°C): ±0.8°C, Voltage: ±0.2%, Current: ±0.2% Linearization: "T/C Types J, K, T, N, E: ±0.1°C, -50 to 200°C, ±1°C maximum, T/C Types R and S: ±0.2°C, -50 to 200°C, ±1°C maximum, T/C Type B: ±1°C maximum RTD: ±0.1°C, -200 to 850°C" |
| Additional Features 1 | Transmitter Power Supply |
| Approvals | CE |
| Chart Diameter | 244 mm |
| Chart Note | Chart Drive: DC Stepper Motor |
| Chart Speed | 1 to 24 hours in steps of one hour, 2 to 31 days in steps of 1 day |
| Current Measurement Range | ± 20 mA |
| Cutout Dimensions | 288 x 356 mm |
| Data protection | Access by password, Internal hardware jumper lock, Lockable Door |
| Deadband | 0 to 10% |
| Display Note | 2 line x 20 character dot matrix liquid crystal with backlight and automatic temperature compensation; 9.6 mm (0.37") character height. Alarm Display: Relay status shown by red and green front panel LEDs |
| Display Type | LCD |
| Enclosure Ratings | IP55, NEMA Type 12 |
| Height | 396 mm |
| Input Note | Input Isolation: Optoelectronic on 2 and 3 input models 500 Vrms channel to-channel, 500 Vrms channel-to-ground |
| Input Protection | ±50 Vdc; Snubber Network: 22 nF and 100 Ω across each contact |
| Input Resistance | Thermocouple: 10 MΩ;±2 mA: 200 Ω;±20 mA: 20 Ω;±2V, ±20V: >1 MΩ |
| Length | 171 mm |
| Materials | Steel, GF Polyester, Acrylic |
| Measurement Range Note | Thermocouples to BS4937 (type B minimum temp 200°C) Current: ±2 mA, ±20 mA Voltage: ±2V, +20 Vdc |
| Measurement Type | Thermocouple, RTD, Current, Voltage |
| Mounting | Panel Mounting or Surface Mounting |
| Operating Temperature, Max | 55 °C |
| Operating Temperature, Min | 0 °C |
| Pen Type | Pen Lift |
| Pen Type Note | Powered, activated from front panel; chart fast time advance possible with pens raised |
| Power Consumption | max 25 W |
| RTD Type | 100 Ω Pt sensor; α= 0.00385 |
| Relative Humidity | 0 to 90% RH, non-condensing |
| Resolution | Positioning Resolution: >0.1% |
| Response Time | 4.5 sec |
| Sensor Break Detection | Thermocouple Burn-Out: Pull-Up or Pull-Down, Selectable; Sensor Fault Action: Software selectable from: high alarm/low alarm/deviation alarm/control relay (high)/control relay (low); relays de-energize in alarm state; assignable to any channel |
| Sensor/Transmitter Power | 12/24 Vdc @ 25 mA |
| Series ID | CT6100-Series |
| Span, Min | 5°C thermocouples K, J, T, E, N and RTD; 50°C other thermocouple types, 50 mV, 200 mA |
| Standard Limits of Error | Error Limit: Cold-Junction Compensation Error: ±0.02°C/°C; Calibration Shift: ±10°C |
| Supply Power Type | AC |
| Switch Rating | 6 A @ 30 Vdc/250 Vac |
| Switch Rating Note | Type: SPDT; 30 Vdc or 250 Vac @ 6 A maximum; 150 W DC, 1660 Vac non-inductive |
| Switch Type | SPDT NO/NC, Selectable |
| Temperature Measurement Range | To BS 4937 - International thermocouple reference tables |
| Temperature Stability | ±0.02% FS/°C |
| Thermocouple Type | J, K, T, E, N, R, B, S |
| Voltage Measurement Range | -2 to 20 Vdc |
| Width | 336 mm |
| Wire Code Option | 3- Wire |
| See All Specs | |
PDFs & Manuals
