1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
FPD2000-Series
High Pressure and Temperature Positive Displacement Flow Meters
Models In Stock
Cette pièce n’est plus disponible. Veuillez consulter la série FPD4000 comme remplacement suggéré.
- Précision ±0,5 % de la lecture
- Comprend un certificat NIST à 3 points
- Corps en aluminium, acier inoxydable 303 ou 316
- Pression nominale jusqu’à 345 bar (5000 psi)
FPD2000-Series
From
C$
4,014.17
Models In Stock
Product Overview
- Précision ± 0.5 %
- Précision ±0,5 % sur une réduction de 10:1 avec un fluide de 30cP
- Remarque sur l'amplitude 1 à 40 Vp-p
- Affichage Pas d'affichage
- Méthode d'entraînement Charge résistive max 50 mA
- Cycle de service 50 % ± 15 %
- Remarque concernant l'impédance de sortie 40 Ω - interrupteur analogique et fusible réarmable automatiquement
- Linéarité ±0,01 % lecture
- Compatibilité avec les fluides Fluides hydrauliques, Huiles / lubrifiants
- Pression de Fonctionnement, max 5000 psi
- Température de fonctionnement, max 85 °C
- Température de fonctionnement, min -40 °C
- Type de raccordement au process NPT femelle
- Température minimale du processus 0 °C
- Répétabilité ±0,1 %
- ID de série FPD2000-Series
- Approvisionnement Remarque 8 mA @ 12 VCC,12 mA @ 24 VCC
- Type d'approvisionnement électrique CC
The FPD2000 Series represents a positive displacement meter that is affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. This reliability, coupled with a large turndown range, offers an affordable replacement for older turbine technology. The meter’s solid construction and excellent dynamic response are well suited to the measurement of oil, grease, fuel, solvents, polyurethanes, brake fluid, skydrol as well as other nonabrasive lubricating fluids. Since there is no need for straight run piping upstream or downstream of the flow meter, the FPD2000 flow meters are simple to use and to install. The meters produce good resolution and high accuracy at low flow rates. Flow may be bidirectional, such as for cylinder position measurements, without damage to internal parts.
PDFs & Manuals
Accessories
accessories
Show Ratings & Reviews
What is the amplitude of the square wave output for model FPD2004?
Thank you for your inquiry about this flow meter. The output wave is equal to the input voltage supplied.
Date published: 2020-10-07
Hello, For the FPD2022 which Digital rate meter do you recommend?
Thank you for your inquiry about the flow meter. The DPF78 is a compatible meter to display the flow rate and accept the frequency output from the sensor.
Date published: 2023-03-27