検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Model-A-709

1/4インチプローブ用温度トランスミッターエンクロージャー、着脱式カバーおよび取り付けアダプター付き

1/4" 프로브용 온도 변환기 인클로저, 분리형 커버 및 장착 어댑터 포함
Model-A-709
販売元 103,187 원
1/4" 프로브용 온도 변환기 인클로저, 분리형 커버 및 장착 어댑터 포함 Model-A-709 Model-A-709
loading all models
製品の概要
  • 외함 등급 NEMA 타입 4X
  • 작동 온도, 최대 212 °F
  • 최소 작동 온도 -40 °F
  • 시리즈 ID Model-A-709

Supported Applications

The Dwyer Model A-709 is a temperature transmitter enclosure designed to house and protect RTD temperature transmitters, specifically the Series 651 and Series 659 models. It mounts these transmitters to 1/4" diameter temperature sensors for indoor or outdoor service.

Operating Conditions & Performance

The enclosure is rated NEMA 4X and constructed with an aluminum housing. The documented operating ambient temperature range is -40 to 212°F (-40 to 100°C). No specific pressure ratings, burst pressures, or vibration/shock specifications are provided in the source documentation.

Dimensions

  • Height: 2-27/32 in (72.23 mm)
  • Width: 3-5/32 in (80.10 mm to 80.12 mm per source variation)
  • Depth: 1-21/32 in (42.07 mm)
  • Base Diameter/Height: 1-5/8 in (41.28 mm)

Configuration Options

The Model A-709 includes a removable core screw with an attached chain to prevent loss during installation or maintenance. The enclosure provides specific interfaces for sensor and wiring integration:

  • Sensor Mounting: 1/8" NPT threads are provided on the assembled unit for mounting.
  • Wiring Feed-through: A 1/2" NPT opening allows wiring to pass through for both transmitter and sensor connections.

Included Adapters and Fittings

The enclosure ships with the following components required for assembly:
  • Enclosure Cover
  • 1/8" male NPT x 7/16-24 male Adapter
  • 1/8" male NPT x 7/16 female Adapter
  • 1/2" male NPT x 1/8" female Bushing
  • M4x8 Socket Cap Screws (quantity: 2)
  • 1/4" I.D. x 3/8" O.D. O-ring

Optional Accessories

The series supports the following optional configurations:
  • Series RTD Temperature Transmitter (e.g., Series 651)
  • A-345 1/8" NPT flange with gasket and two self-tapping screws for sheet metal duct installation

Key Product Differences

The Model A-709 is a single enclosure configuration intended to accommodate Series 651 or Series 659 transmitters. The assembly process involves inserting the bushing and adapters, attaching the RTD transmitter using M4x8 screws, feeding wiring through the 1/2" NPT opening, and securing the sensor via hex fittings outside the enclosure.

When installing an optional A-345 flange, the unit utilizes its 1/8" NPT threads for mounting to sheet metal ducts. The documentation notes that care must be taken during wiring installation to ensure wires clear all internal metal surfaces before replacing and tightening the cover screws.

ja-JP
ko_KR
設定を保存する