검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

TQ513

샤프트 대 샤프트 회전 토크 센서(옵션 인코더 포함)

  • 안전한 연결을 위한 은 슬립 링
  • 최대 5000 RPM의 작동 속도
  • 각도 또는 속도 측정을 위한 선택적 광학 인코더
TQ513
시작 7,129,154 원
샤프트 대 샤프트 회전 토크 센서(옵션 인코더 포함) TQ513 TQ513
loading all models
제품 개요
  • 정확도 ± 0.1%
  • 정확도 등급 0.1% 대 0.25%
  • 정확도 세부 사항 영점 밸런스 오차: ± 1.0%
  • 최대 보상 온도 76 °C
  • 최소 보상 온도 21 °C
  • 전기 연결 트위스트 락 커넥터
  • 전기 연결 노트 4핀 트위스트 락 커넥터(상대 커넥터 제공); 옵션 광학 인코더 포함 10핀 트위스트 락 커넥터(상대 커넥터 제공)
  • 히스테리시스 ±0.1%
  • 입력 저항 1000 Ω
  • 선형성 ±0.1%
  • 장착 샤프트-샤프트 장착
  • 작동 온도, 최대 85 °C
  • 최소 작동 온도 -40 °C
  • 회전 속도 5000 rpm
  • 안전 과부하 1.5
  • 시리즈 ID TQ513
  • 전원 유형 DC
  • 공급 전압 최대 20 Vdc
  • 스팬 오차에 미치는 열 효과, 최대 ±0.0036% FS/°C
  • 열 효과 제로 오차, 최대 오류 ±0.0036% FS/°C
  • 토크 측정 유형 로터리

Supported Applications

The Omega TQ513 series consists of shaft-to-shaft rotary torque sensors designed to measure the performance of electric drive motors, small DC motors, clutches, and fans. These rotating torque sensors utilize a shaft-to-shaft in-line placement configuration for direct measurement.

Operating Conditions & Performance

The TQ513 series operates within an ambient temperature range of -40 to 85°C (-40 to 185°F), with compensated performance specified between 21 to 76°C (70 to 170°F). The sensors feature a maximum shaft speed of 5000 RPM and support excitation voltages up to 20 Vdc. Performance specifications include linearity of 0.10% FS, hysteresis of 0.10% FS, and zero balance of 1.0% FS. Thermal effects are rated at 0.0036% FS/°C for both zero and span.

Measurement capacities range from 50 in-oz to 2000 in-lb (equivalent to 0.35 to 226 N-M). The bridge resistance is 1000 Ω with a nominal output of 2.0 mV/V at full scale. Overload capacity is rated at 150% FS.

Configuration Options

The series offers configurable capacities and optional features to accommodate specific testing requirements:

  • Capacities: Available in ranges from 50 in-oz (TQ513-003) through 2000 in-lb (TQ513-2K), with intermediate steps including 100, 200, 500, and 1000 in-oz, as well as 100, 200, 500, 1000, and 1500 in-lb.
  • Electrical Connections: Standard models utilize a 4-pin twist lock connector. Models with the optional encoder use a 10-pin twist lock connector (mating connectors supplied).
  • Housing Materials: Sensors rated ≤100 in-lb feature aluminum sensor housings; sensors rated ≥100 in-lb utilize steel sensor housings.
  • Shaft Materials: Capacities ≤100 in-lb use stainless steel (SS) shafts, while capacities ≥100 in-lb employ steel shafts. Shaft diameters vary by model: 3/8" for lower capacity units and 0.749" or 0.999" for higher capacity models.
  • Options: An integral 1024 ppr optical encoder is available (suffix -EN1024) to provide angle or speed measurement signals including CW LEAD and CW TRAIL outputs. A foot mounting bracket option is also offered (suffix -MB).

Key Product Differences

The TQ513 series distinguishes itself by capacity-dependent construction materials and shaft dimensions. Lower capacity models (TQ513-003 through TQ513-062) utilize 3/8" stainless steel shafts with flats for keying, housed in aluminum sensors. Higher capacity models (TQ513-100 through TQ513-2K) transition to larger diameters of 0.749" or 0.999", incorporate keyed connections (e.g., 3/16" or 1/4" keys), and are constructed with steel shafts and sensors.

Electrical output configurations vary based on the selected connector: standard models provide +EXC, -EXC, +SIG, -SIG signals via a 4-pin interface. The optional encoder configuration expands this to a 10-pin interface adding GND, +5V, CW LEAD, and CW TRAIL outputs.

액세서리

installation hardware

Field installable Foot Mounting Bracket
TWD6,818 / each
0 재고 있음
TQ513-003-006-012-030-062-100-200-500-1K-2K-EN1024-MB
용량
엔코더 옵션
브래킷 옵션
ko-KR
ko_KR
설정 저장