한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
HHG191-Gauss-Meter
Omega 휴대용 자기장 가우스 미터(디스플레이 포함)
재고가 있는 모델
- Switch Between the Display of Micro-Tesla and Milli-Gauss
- Data Hold (HOLD) and Maximum (MAX) Hold Function
- Range Display (20, 200, 2000)
- Low Battery Detector
- Over Load Display "OL"
제품 개요
- 정확도 ± 2.5%
- 정확도 세부 사항 ±(2.5% + 6자리) at 50 Hz/60 Hz
- 대역폭 30~300 Hz
- 배터리 수명 200시간
- 배터리 크기 및 종류 알칼라인 9V
- 표시 단위 가우스, 테슬라
- 디스플레이 범위 200/2000 mG, 20/200 μT
- 디스플레이 해상도 0.1/1 mG 또는 0.01/0.1 uT
- 디스플레이 유형 3.5 숫자 LCD
- 디스플레이 유형 노트 3 1⁄2자리 LCD, 최대 표시값 1999
- 높이 130 mm
- 길이 38 mm
- 배터리 수 1
- 작동 습도 0 ~ 80% RH
- 작동 온도, 최대 50 °C
- 최소 작동 온도 5 °C
- 시리즈 ID HHG191-Gauss-Meter
- 무게 180 g
- 폭 56 mm
Supported Applications
The Omega HHG191 is a handheld Magnetic Field Meter designed to measure electromagnetic fields (EMF) of extremely low frequency (ELF) ranging from 30 to 300 Hz. The series measures electromagnetic field radiation intensity from various electrical appliances, including power lines, microwave ovens, air conditioners, refrigerators, computer monitors, and audio/video devices.
Operating Conditions & Performance
The HHG191 displays readings in micro-Tesla (µT) or milli-Gauss (mG). The documented measurement ranges include 20 µT, 200 µT, 2000 µT, 20 mG, 200 mG, and 2000 mG. An overload condition is indicated by 'OL' on the left side of the display; users should select a higher range in this instance. A reading lower than 0.5mG may be due to environmental factors rather than a malfunction.
Configuration Options
The HHG191 features an LCD and is powered by battery, with low battery detection indicated by a battery icon on the display. Functional capabilities include:
- Data hold function to permanently lock readings (press HOLD again to unlock).
- Maximum hold function to retain the maximum value encountered.
- Range selection via dedicated button.
- Unit selection between mG and µT.
The device includes a sensor position, power on/off switch, battery cover, and buttons for unit and range selection. The meter is made in Taiwan and carries CE, ISO 9001, and ISO 9002 certifications.
Key Product Differences
The HHG191 series consists of a single handheld model configured with the features described above. No alternative housings, sensor types, or output configurations are documented for this specific series in the provided source material.
PDF 및 매뉴얼