1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
TQ513
Capteurs de couple rotatif arbre-à-arbre avec encodeur optionnel
- Bagues collectrices en argent pour connexions sécurisées
- Vitesse de fonctionnement jusqu'à 5000 tr/min
- Encodeur optique optionnel pour la mesure d'angle ou de vitesse
TQ513
À partir de
C$
5,889.00
Aperçu du produit
- Précision ± 0.1 %
- Classe de précision 0,1 % à 0,25
- Précision Erreur d'équilibre zéro : ± 1,0 %
- Température compensée, max 76 °C
- Température compensée, min 21 °C
- Connexion électrique Connecteur à verrouillage par rotation
- Connexion électrique Remarque Connecteur à verrouillage tournant 4 broches (connecteur d’accouplement fourni par le fournisseur); connecteur à verrouillage tournant 10 broches avec encodeur optique en option (connecteur d’accouplement fourni)
- Hystérésis ±0,1 %
- Résistance d'entrée 1000 Ω
- Linéarité ±0,1 %
- Montage Montage arbre-à-arbre
- Température de fonctionnement, max 85 °C
- Température de fonctionnement, min -40 °C
- Vitesse de rotation 5000 tr/min
- Surcharge sécurisée 1.5
- ID de série TQ513
- Type d'approvisionnement électrique CC
- Tension d'alimentation 20 Vcc max
- Effet thermique sur l'erreur d'étendue, max ±0,0036 % FS/°C
- Effet thermique sur l'erreur zéro, max ±0,0036 % FS/°C
- Type de mesure du couple Rotation
La série TQ513 est conçue pour mesurer le couple de rotation à l'aide d'un placement en ligne d'arbre à arbre. Des bagues collectrices en argent très résistantes assurent une transmission sûre de la puissance et du signal de l'arbre rotatif à votre instrumentation. Un encodeur optique 1024 ppr est disponible en option pour mesurer l'angle ou la vitesse.
Accessoires
installation hardware
Afficher les évaluations et les avis
Rated 5 out of
5
by
Carlos Ibanez from
Facility manager
Easy install, easy connection and calibration, just need excellent alignment.
Date published: 2022-02-21
Am I able to get this with a 20mm shafts?
Thank you for your question. Sorry but we do not offer any optional shaft sizes for our torque sensors. Please feel free to contact us again if you have any additional questions.
Date published: 2019-10-01
Can this sensor be used in a static or low rpm application? e.g. 1RPM?
Yes it can. If you hold one end of shaft to stop it from turning and apply static torque to the other end of the shaft you should be able measure that torque. It should also work at low rpm.
Date published: 2021-01-30
What size are the mounting holes at the bottom for the TQ513-100 model?
The four holes are #8-32 threads. They are 0.25" Deep
Date published: 2020-08-22
How do I use the optical encoder option with the transducer? Can I purchase the 10-pin lock connector on your website? Thanks!
You would need to use a device that will read the pulse output from the encoder. Output is 1024 pulses per revolution. The 10 pin mating connector is supplied with the torque sensor when you order it with the encoder option. If you need to order a spare connector the part# is TQ500-CONN10.
Date published: 2020-03-02
Are the enclosure dimensions the same across the different capacities? I understand the shaft diameter and key sizing changes. Is there a CAD file available anywhere?
Thank you for contacting Omega. Yes, the housing sizes are the same for all ranges, but the shaft and key dimensions change with the range. Three different sized shafts are used. The spec sheet for the TQ513 shows the shaft used on ranges of 62 in-lb and below. For the higher ranges refer to the spec sheet for the TQ514 series torque sensors. Should you have any additional questions please feel free to contact us again.
Date published: 2021-04-14
What are the current requirements for this sensor?
Thank you for your inquire
This has a max of 20 volts dc and output of 2 milli volts per volt. The current is very minimal.
Should you need to know the precise current email pressure@omega.com for further information
Date published: 2020-09-18
The manual shows utilizing this with two flexible couplings. Is it OK to use a hard coupling on one end and a flexible coupling on the other?
Yes you can use a combination of hard the flexible couplings.
Date published: 2021-04-20
WHAT IS THE COUNTRY OR ORIGIN?
Thank you for your inquiry. Country of Origin is USA.
Date published: 2023-05-24