Skip to search Skip to main content Skip to navigation

DP600A

Universal 6/12 Channel 1/4 DIN Panel Meter, Universal Input

5.0

(1)

Models In Stock

See Product Overview

DP600A

From ^$ 1,206.55

Models In Stock

Shop Models

4 Variations available

See all series options below

Product Overview

Compliance

View Less

Reviews

Show Ratings & Reviews

5.0

(1)

Rated 5 out of 5 by jastew358 from Universal 6/12 panel meter This product is a great addition to our machine safety; easy to use and consistent

Date published: 2020-12-29

Questions & Answers

I was hoping to connect the meter to a pc to log data in conjunction with the OEM software. Is this possible? If so, where could I find the wiring diagram for the serial connection? I've looked in the manual but cannot find any specifics for this wiring.

Asked by: jacob96

The 3 terminal connector marked serial is where you make your communication connection. Pin #1 code B is your Transmit (TX), pin #2 code A is your receive (RX) and pin #3 is the RTN connection. You can connect directly to your PC's Comm port or use a OM-CONV-USB and go into a USB input.

Answered by: ANBENG

Date published: 2023-12-12

Are there any examples of how to communicate with modbus using Labview? (i.e. an instruction to read temperature through visa)

Asked by: 1anh21

Thank you for the inquiry. We do not have labview examples unfortunately. But the modbus register assignments and details are given in the manual; https://assets.omega.com/manuals/DP600A_Manual.zip Best regards OMEGA

Answered by: RS engineer

Date published: 2020-01-14

Should the controller automatically read multiple temperatures from multiple thermocouples after installation or is there a setting I am missing?

Asked by: superman01

On the DP606A there should be one temperature displayed per active zone with a Thermocouple input. Function 2 sets which zones are active. If you have further questions contact the Temperature Engineering group at temp@omega.com.

Answered by: ApplicationEngineerANB

Date published: 2022-09-22

I am trying to communicate between my PC and this controller through labview, but have trouble sending data. Are there any examples of modbus instructions using visa available? (i.e. how to read temperature or change between Fahrenheit/Celsius)

Asked by: 1anh21

Thanks again 1anh21. We do not have labview examples but modbus details are provided in main manual linked here; https://assets.omega.com/manuals/DP600A_Manual.zip Best regards OMEGA

Answered by: RS engineer

Date published: 2020-01-14

looking for DP612A Panel meter Operating and set up instruction <we have purchased last week ,

Asked by: DP 612A

Thank you for your inquiry! You can find the manual in the "Manuals" tab under Product Specs.

Answered by: Application Engineer CK

Date published: 2021-07-08

Would like to know if there is a Modus register that can be used to stop the automatic temperature values loop and just show the temperature value of a specific sensor.

Asked by: guillermoe

Hi guillermoe Thank you for the inquiry. The necessary commands were not brought out to the modbus registers. Best regards OMEGA

Answered by: NorwalkAE_RS

Date published: 2021-09-28

Why even use RTD, the accuracy still ±1 degree C, RTD itself should be within ±0.5 degree C between 0 to 100 C, can the Controller maintain the temperature measurement within 0.5 degree C accuracy?

Asked by: seraph3

Thank you for your inquiry. The accuracy for the RTD Input is ±1°C. You still need to add the accuracy of the RTD itself to the overall accuracy.

Answered by: Application Engineer CB

Date published: 2022-05-16

Videos & Downloads

Compliance Certificates (3)

DP600A

Universal 6/12 Channel 1/4 DIN Panel Meter, Universal Input

I was hoping to connect the meter to a pc to log data in conjunction with the OEM software. Is this possible? If so, where could I find the wiring diagram for the serial connection? I've looked in the manual but cannot find any specifics for this wiring.

Are there any examples of how to communicate with modbus using Labview? (i.e. an instruction to read temperature through visa)

Should the controller automatically read multiple temperatures from multiple thermocouples after installation or is there a setting I am missing?

I am trying to communicate between my PC and this controller through labview, but have trouble sending data. Are there any examples of modbus instructions using visa available? (i.e. how to read temperature or change between Fahrenheit/Celsius)

looking for DP612A Panel meter Operating and set up instruction &lt;we have purchased last week ,

Would like to know if there is a Modus register that can be used to stop the automatic temperature values loop and just show the temperature value of a specific sensor.

Why even use RTD, the accuracy still &plusmn;1 degree C, RTD itself should be within &plusmn;0.5 degree C between 0 to 100 C, can the Controller maintain the temperature measurement within 0.5 degree C accuracy?

looking for DP612A Panel meter Operating and set up instruction <we have purchased last week ,

Why even use RTD, the accuracy still ±1 degree C, RTD itself should be within ±0.5 degree C between 0 to 100 C, can the Controller maintain the temperature measurement within 0.5 degree C accuracy?