1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
JQIN
Thermocouple Probes with Molded Standard Size Connectors
Models In Stock
- Male Connector Permanently Molded to Probe Sheath adds Strength and Durability
- Standard Size Thermocouple Connectors, Color-Coded with Thermocouple Type
- Choice of 304SS, 321SS or Inconel Sheath
- High Strength Bendable Design
JQIN
From
$
55.02
Models In Stock
Can't find the right model?
Use our custom configurator to fine tune your product
Product Overview
- Cable Clamp PCLM
- Connector Temperature, Min -29 °C
- Electrical Connection Standard Male Thermocouple Connector
- Mating Connector Standard Female Thermocouple Connector
- Process Connection Size N/A
- Process Temperature, Min 0 °C
- Safety Clip SFCL
- Series ID JQIN
- Temperature Sensor Type Thermocouple
The OMEGA® Quick Disconnect Molded Thermocouple Assemblies are available with sheath diameters of 1 /16 , 1 /8 , 3 /16 and 1 /4 " in standard 12, 18 and 24" nominal lengths. Mating Connector and Clamp sold separately! Custom lengths are also available, consult sales for details. Now 6" length readily available! Use the "Part Number Builder" below to select the probe best for your needs.
Probes less than 48 inches in length are shipped 'straight'. Probes equal to or greater than 48 inches in length are shipped 'coiled'. If a probe that is 48 inches or longer must ship straight, please add "-SST" to the end of the part number, and add $75.00 to the price of the probe. Maximum ship straight length is 96 inches. Additional shipping fees from carrier may also apply for non-standard length packaging.
Show Ratings & Reviews
What is the minimum temperature which the tip of the TQSS-18G-12 is rated to? Can the tip be immersed in liquid nitrogen without damage? What is the accuracy at -196 deg C?
Thank you for your inquiry. We do not state a minimum temperature below 0°C (32°F). Testing shows the accuracy is no longer linear. If you want the accuracy, we suggest that you get a CAL-4 Calibration at an additional cost for temperatures below 0°C. Please contact us at temp@omega.com
Date published: 2020-07-11
what is the wire diameter for OMEGA thermocouple of this model KQIN-116E-72
Thank you for your inquiry. The wire gauge is 24 AWG
Date published: 2023-07-28
What is the max temperature of the connector on a KQSS-18U-6?
Thank you for your inquiry. Connector Body Rated From -29 to 180°C (-20 to 356°F).
Date published: 2024-07-17
do the KQSS-14U-6 K type thermocouples have standard tolerances or special tolerances?
Thank you for your inquiry. KQSS-14U-6 K type thermocouples have special tolerances (SLE).
Date published: 2023-09-26
What is the correct mating connector (sold separately)? Or do the thermocouple ship as pictured? For example, thermocouple part TQSS-116E-36, Would connector HST-T-F be all that is needed?
Thank you for your inquiry! Yes, the mating connector is sold separately. Both the HST-T-F (Cadmium Free Liquid
Crystal Polymer) and the OSTW-T-F (Glass-Filled Nylon) are options for a standard female connector.
Date published: 2021-06-03
What is the response time for TQSS-18G-6? What is the accuracy of TQSS-18G-6?
Thank you for your interest in our Products
.Response time for thermocouple probes are based on the following Factors .
The probe diameter (the smaller the diameter the faster the response time) ,
If the probe is Grounded , Ungrounded or Exposed tip , and the application .
For the TQSS-18G-6 , the response time in air is 1.4 seconds and in water 0.6 seconds
Date published: 2022-02-15
Do the Thermocouple Probes with Molded Standard Size Connectors meet the requirements of ASTM E1137?
Hi SamP19,
ASTM E1137 is not applicable to this probe.
Best regards
OMEGA
Date published: 2024-07-05