Need assistance? Call us: 1-800-663-4209
HX93-Srs-Temp-RH-Sig-Cond
Temperature/Relative Humidity Transmitter w/ Display & Probe
Models In Stock
- 4 to 20 mA, 0 to 1 Vdc, 0 to 5 Vdc or 0 to 10 Vdc Outputs for Both Temperature and Relative Humidity
- Rugged Industrial Splashproof Enclosure NEMA 13 (IP54)
- Accurate to ± 0.6°C (0 to 50°C) and ± 2.5% (10 to 90% Relative Humidity)
- New Models with Built-In Digital Display to Indicate Temperature and Relative Humidity
HX93-Srs-Temp-RH-Sig-Cond
From
$
576.48
Models In Stock
Product Overview
- Cable Diameter 8 mm
- Electrical Connection Liquid-tight nylon with neoprene gland, for 2.50 to 8.00 mm (0.09 to 0.315") diameter cable; internal 6 position terminal block accepts 14 to 22 gauge wire
- Enclosure Ratings IP54, NEMA Type 13
- Length 80.01 mm
- Materials, Wetted Polycarbonate
- Measurement Type Temperature, Humidity
- Relative Humidity Response Time 8 sec
- Repeatability ± 0.1% RH
- Response Time 5 to 30 sec
- Sampling Rate 0.25 Hz (4 seconds between updates)
- Series ID HX93-Srs-Temp-RH-Sig-Cond
- Supply Power Type DC
- Temperature Measurement, Max 75 °C
- Temperature Measurement, Min -30 °C
- Width 82.3 mm
- Wire Gauge 22 to 14 AWG
The HX93B and HX93BD Series transmitters provide remote and on-site monitoring of temperature and relative humidity. Both series output a linearized current or voltage signal proportional to the temperature and relative humidity. Relative humidity output is temperature compensated. Current output models enable placing of the transmitter at a remote location virtually any distance away from the measuring device. The HX93BD models feature a built-in digital display that indicates both temperature and relative humidity simultaneously. All models use an accurate digital sensor. A stainless steel mesh type filter, easily removable for cleaning, protects the sensor. Mounting screws are easily accessible inside the rugged, polycarbonate enclosure which protects the electronics to NEMA 13 (IP54) rating.
PDFs & Manuals
Accessories
accessories
cables
installation hardware
sensors
Show Ratings & Reviews
Rated 5 out of
5
by
Stevemcq from
Temperature/Relative Humidity Transmitter
Tried other units first, with inconstant and sporadic readings. This unit is very consistent and accurate.
Date published: 2017-08-31
Rated 5 out of
5
by
Luisa Mc from
excellent product
excellent product, service pretty good, more than I expected
Date published: 2025-01-06
Rated 5 out of
5
by
Luisa Mc from
Late but always a good product
excellent product always a good product with a quality specification OK
Date published: 2024-01-06
Rated 5 out of
5
by
tsmith35 from
Works great even in a dirty environment
I got several of these units for capturing ambient temperature and humidity around some of the batch mixers in my plant. The units were easy to set up and were quite reliable, especially considering the dirty environment that they lived in.
Date published: 2020-11-03
Rated 3 out of
5
by
NRod from
Generally very good.
Although they are expensive it is nice to have both the display and the analog output. They are generally reliable for extended periods of time.However, one of the last two I purchased was dead out of the box. That was not something I had seen before, having used dozens of this generation and the previous generation.
Date published: 2020-08-03
Rated 1 out of
5
by
Evan_ from
Unknown functionality due to manufacturing issue
I bought this sensor and it was labeled properly HX93BV2 for the 0-10Vdc version on the outside but on the inside, the printed circuit board is marked as "C" indicating it's a 4-20mA version. So I exchanged it and alas, the second one has the same assembly issue.
Date published: 2019-10-25