1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
LCM101-25
25 kgf, ± 0.03%, Linearity, 3 mV/V Output, Cable
Product Specs
<< See all Product Models| Brand |
 |
| Cable Length | 30 ft |
| Calibration Option | 5 POINT NIST |
| Electrical Connection | Cable |
| Electrical Output | 3 mV/V |
| End Rod | MREC-M6M |
| Force Type | Compression, Tension |
| Full Scale Deflection | 0.02 in |
| GrossWeightValue | 1 |
| Height | 38 mm |
| Hysteresis | ± 0.05% |
| Input Resistance | 350 ± 10 Ω |
| Interchangeability | 0.0025 |
| Length | 64 mm |
| Linearity | ± 0.03% |
| Load Button | MLBC-M6 |
| Load Cell Capacity | 25 kgf |
| Load Cell Type | S-beam |
| Materials | 17-4 PH Stainless Steel |
| Operating Temperature, Max | 93 °C |
| Operating Temperature, Min | -40 °C |
| Output Resistance | 350 ± 10 Ω |
| Overload, Max | 300% FS |
| Process Temperature, Max | 71 °C |
| Process Temperature, Min | 17 °C |
| Repeatability | ± 0.01% |
| Safe Overload | 150% FS |
| Series ID | lcm101-lcm111 |
| Supply Power Note | 10 Vdc, 15 Vdc maximum |
| Supply Voltage | 10 Vdc |
| Thermal Span Effect | 0.0018% FSO/°C |
| Thermal Zero Effect | 0.0018% FSO/°C |
| Weight | 0.45 kg |
| Width | 13 mm |
| Wire Gauge | 24 AWG |
| Wiring/Connector Table | Green: (+) Output; White: (-) Output; Black: (-) Input; Red: (+) Input |
| Zero/Balance Error | ± 1% |
| Country of Origin | United States |
| See All Specs | |
PDFs & Manuals
Accessories
Show Ratings & Reviews
Rated 4 out of
5
by
Tim H from
good value load cells
I have 3 of these now (different capacities) . the price is reasonable, Omega is a trusted source and the service and support is very good. Make sure to buy the combined tension-compression for the best usefulness. For power and display I use the Digital Panel meter from Automation direct (yes a competitor) but Omega has a similar unit. Buy extra connectors at Newark and the load cells are plug and play (just change the settings on the display). I would give a 5 star but the spot welded covers for the strain gauge are poor in that they can bend and open up. I tie wrap them shut to prevent any issues. The hardware (buttons and rod ends) are useful but a bit pricey.
Date published: 2020-04-19