1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
HHM-EX505
Choose a Variant
Product Specs
<< See all Product Models| Brand |
 |
| AC Current Range | 0.1 μA to 10A |
| AC Voltage Range | 0.1 mV to 1000 Vac |
| Additional Features 1 | Frequency (Electrical) 5 Hz to 1 kHz, (Electronic) 0.001 Hz to 10 MHz |
| Capacitance | 0.01 nF to 100 μF |
| Continuity Test | Yes |
| DC Current Range | 0.1 μA to 10A |
| DC Voltage Range | 0.1 mV to 1000 Vdc |
| Display Note | Display Counts: 4000 |
| Duty Cycle | 0.1 to 99.9% |
| GrossWeightValue | 1.72 |
| Height | 184 in |
| Length | 57 in |
| Measurement Accuracy Note | Basic Accuracy: 0.5% |
| Measurement Type | AC/DC Voltage/Current, Resistance, Capacitance, Frequency, Type K Temperature |
| Resistance | 40 MΩ |
| Series ID | HHM-EX540-Multimeter-Series |
| Supply Power Type | Battery |
| Weight | 349 g |
| Width | 83 in |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 1 out of
5
by
Unhappy customer 4444 from
Defective EXTECH EX530
purchased a multimeter recently (order HQ02088673). I received the multimeter but it is defective out of the box. The voltmeter mV AC mode fluctuates up to 4 mv and never gives the same reading when I short the probes together. It never goes to (or near) zero. The best stable reading I got was 0.08 mV AC. It started to fluctuate again when I released and re-shorted the probes again. I bought the EXTECH EX530 for that specific mode. (resolution of 0.01 mV in AC). I don't mind a stable zero offset. But a drift of over 400 graduations is unacceptable.
There is also a problem with the ohm meter. It fluctuates and I can not trust the continuity function (beeb) as it comes on and off whit the probes on a short peaces of steel. Even with pressure applied.
I tried a different set of probes and it does the same thing.
In the RMA process for repair
Date published: 2021-09-02