1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
ACI-CO2-Duct
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 40 ppm, ±3 % |
| Applications | Air and HVAC, Building and Maintenance |
| Approvals | EMC Directive 2014/30/EC |
| CO2 Measurement Range | Up to 10,000 ppm |
| Calibration | Automatic Baseline Correction |
| Contact Fail-Safe | Polarity protected |
| Dimensions Note | Product Dimensions (H) 5.59" (142 mm) x (W) 3.31" (84 mm) x (D) 1.81" (46 mm) |
| Display Type | N/A |
| Electrical Output | 4 to 20 mA, 0 to 5 Vdc, 0 to 10 Vdc |
| Enclosure Material | ABS Plastic |
| Enclosure Material Note | Duct Box: IP65 rated, PC & ABS blend, Flammability Rating UL94V-0 Cover: Makrolon® 6555 plastic, Flammability Rating UL94V-0 Pipe: PC & ABS blend, Flammability Rating UL94V-0 |
| Enclosure Ratings | IP65, UL94-HB |
| Gas Concentration | 0 to 2000 ppm |
| Height | 4.5 in |
| Length | 1.12 in |
| Loop Resistance, Max | 500 Ohm load maximum |
| Material Construction Option | none |
| Measurement Type | Carbon Dioxide |
| Measuring Range | 0 to 2,000 ppm |
| Mounting Orientation | Duct Mount |
| Operating Humidity | 0 to 95% RH, non-condensing |
| Operating Temperature, Max | 122 °F |
| Operating Temperature, Min | 32 °F |
| Power Consumption | 3 VA |
| Pressure Dependence | + 1.6% reading per kPa (deviation from standard pressure 101.3 kPa) |
| Response Time | ≤ 2 minutes, diffusion |
| Sensor Type | Single beam infrared sensing technology (NDIR) |
| Series ID | ACI-CO2-Duct |
| Supply Voltage | 19 to 29 Vac |
| Tightening Torque | 0.5 Nm (minimum); 0.6 Nm (maximum) |
| Warm Up Time | < 1 Minute (@ full specs < 15 minutes) |
| Weight | 0.23 lb |
| Width | 2.75 in |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews