Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
PCM5-Series
PCM5 convert a 4 to 20 mA signal to a time proportional output
Models In Stock
- Tolerates Inputs Less than 4 mA
- Converts 4 to 20 mA to a Time Proportional Output
- Mounts Directly on a Single 3 to 32 VdcInput SSR
- Supports Single Phase 50 or 60 Hz Operation
Product Overview
- Frequency 50 to 60 Hz
- Input Control Signal 3 to 32 Vdc
- Operating Temperature, Max 40 °C
- Operating Temperature, Min 0 °C
- Series ID PCM5-Series
Supported Applications
The OMEGA PCM5 Series is a pulse control module designed to convert a 4 to 20 mA signal from a process or temperature controller, or computer, into a time proportional output. The converter mounts directly onto the input terminals of a solid state relay (SSR) that accepts a 3 to 32 Vdc input. This configuration supports single phase 50 or 60 Hz operation for power control applications.
Operating Conditions & Performance
The PCM5 Series operates within an ambient temperature range of 0 to 40°C (32 to 104°F). The module accepts a minimal analog input signal of 4 to 20 mA, with permissible operation from 0 to 30 mA. It includes reverse polarity protection and exhibits no abnormal operation below 4 mA. A compliance voltage requirement of 6.4V is specified for the circuit.
Time base performance varies by duty cycle: approximately ~200 mS @ 50%, extending to ~500 mS towards 0 and 100% output levels.
Key Specifications
- Analog Input Signal: 4 to 20 mA minimal; 0 to 30 mA permissible
- Compliance Voltage Requirement: 6.4V
- Ambient Temperature: 0 to 40°C (32 to 104°F)
- Dimensions: 45 L x 51 W x 20 mm D (1.75 x 2.0 x 0.80")
Configuration Options
The series is offered as the PCM5 pulse control module. Electrical connections for the 4 to 20 mA input are provided via lever clamps on the converter itself. The unit mounts directly onto SSR input terminals, while the associated SSR power section provides connection points for line and load.
Configuration Details
- Output Signal: Time Proportional Output
- Power Supply Compatibility: 3 to 32 Vdc (input to SSR)
- Mechanical Interface: Direct mount on SSR input terminals with lever clamps for signal input
- Certifications: CE mark applies to appropriate devices upon certification
Key Product Differences
The PCM5 Series is identified by the model number PCM5, described as a pulse control module. The series documentation notes that the unit shown in reference images (e.g., mounted on an SSR330DC25 solid state relay) represents actual size; however, the SSR is sold separately and not included with the converter.
PDFs & Manuals
