Skip to search Skip to main content Skip to navigation

Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.

Series-616W

Differential Pressure Transmitter, ± 0.25% Accuracy, NEMA 4X, 4-20 mA Output

  • NEMA 4X rated enclosure provides protection in harsh environments permitting outdoor monitoring or in areas where dust and particulate matter exists
  • Easy to read LCD display provides immediate local alerts allowing corrective action to be taken quicker to eliminate the problem from becoming widespread
  • Zero and span controls provides easy calibration checks and shorter installation time to get device running and monitoring
Series-616W
From  359,92
Differential Pressure Transmitter, ± 0.25% Accuracy, NEMA 4X, 4-20 mA Output Series-616W Series-616W
loading all models
Product Overview
  • Accuracy Detail ± 0.25% FS @ 77°F (25°C), display accuracy ± 0.5%
  • Electrical Connection Screw Terminal
  • Enclosure Ratings IP66, NEMA Type 4X
  • Long Term Stability ± 1% FS/year
  • Materials, Wetted Consult Factory
  • Media Compatibility Air, Argon, Carbon dioxide, Helium, Nitrogen, Non-Conductive Gases, Non-Corrosive Dry Gases
  • Mounting Note Not Position Sensitive
  • Operating Temperature, Max 70 °C
  • Operating Temperature, Min -20 °C
  • Measurement Pressure Type Differential
  • Process Connection Note Barbed, dual size to fit 1/8˝ and 3/16˝ (3.12 and 4.76 mm) ID rubber or vinyl tubing
  • Process Connection Size 1/8 in, 3/16 in
  • Process Connection Type Stepped Barb Fitting
  • Span Adjustment Push Button
  • Supply Power Type AC/DC
  • Wire Gauge 26 to 16 AWG
  • Zero Setting Adjustable Range Push button

Positive, negative and differential pressures can be measured within a full span accuracy of ±0.25 with the Series 616W Differential Pressure Transmitter. Units are enclosed in a polycarbonate case, rated NEMA 4X (IP66) and operate by sensing the pressure of air and compatible gases then sending a standard 4-20 mA output signal. Design enables operation in 2-wire current loops. A wide range of models are available factory calibrated to specific ranges. The span and zero controls are for use when checking calibration. They are not intended for re-ranging to a significantly different span. The LCD display allows local indication of pressure.

NIST CALIBRATION available in Product Configurator.



⚠WARNING: This product can expose you to Styrene a chemical known to the State of California to cause Cancer and Bisphenol A (BPA) a chemical known to the State of California to cause reproductive toxicity. Click Here.

Product Applications

  • Dust collection
  • Outdoor HVAC
  • Roof-top equipment
en-NL
en_NL
Save Configuration