Need assistance? Call us: 1-800-663-4209
HTC
Fiberglass Heater Cords 900 °F Max and 120-240 Volts
Models In Stock
- Maximum Exposure Temperature 482°C (900°F)
- Wraparound Diameters as Small as 3.2 mm (1/8')
- Knitted and Braided Fiberglass Construction
- Power Density: 0.003 W/mm2 (1.8 W/in2)
HTC
From
C$
73.00
Models In Stock
Product Overview
- Additional Features 1 Suitable for Electrically Conductive Surface
- Enclosure Ratings IP5X
- Exposure Temperature, Max 482 °C
- Heater Diameter 0.125 in
- Heater Width 0 in
- Insulation Double-Braided Fiberglass
- Lead Wire Exit Direction Opposite
- Lead Wire Exit Direction Note Separable molded plug on each end
- Material Construction Option N/A
- Power Density, Max 1.8 W/in²
- Series ID HTC
- Thermostat Type Not Built-In
- Wire Length 24 in
Fiberglass heater HTC cords with a maximum exposure temperature of 900°F (482°C) and voltage range of 120-240V. Featuring a 0.125-inch diameter, double braided fiberglass construction, these cords are designed for wrapping around beakers and tubes. They offer a power density of 0.003 W/mm² (1.8 W/in²) and an IP5X enclosure rating, ensuring durability and efficient heating in compact applications.
Show Ratings & Reviews
Rated 5 out of
5
by
Ahmad from
Thankful
I bought this product a month ago and I am so happy using it. Thank you so much
Date published: 2017-09-25
Rated 2 out of
5
by
jsci from
Fragile and dangerous
Generally menacing and fragile. The nichrome wire pulls out of the copper connection if you look at it funny; the nichrome also has no coating except the fabric, which means if the fabric frays or something sharp happens to poke it you have a short and a good start towards a fire or electrocution. Two stars because I haven't found an alternative.
Date published: 2018-12-07
Rated 5 out of
5
by
Haydn S from
No Better Choice!
The product and the customer service I’ve received has been outstanding. The product works better than I hoped for, and I received in a timely, professional manner. All in all, I’ve had a great experience working with Omega and plan to continue contacting them with my future needs.
Date published: 2022-03-07
Rated 5 out of
5
by
Anonymous from
Keeping gas in supply lines from liquifying
I purchased several of these rope heaters to keep the tubings of CL2, BCL3 and SiCL4 feeding
our processing tool warm, so that the gas does not liquify in the lines and clog the mass flow
meters. These worked well, and were easy to wrap round the 1/4" tubing. I used a temperature
controller to set temperature to 25 degrees C
Date published: 2021-04-01
Rated 5 out of
5
by
Steven from
CEO
I'm so happy with it
I use heat the electrical PVC pipe before bend. It works perfectly.
Date published: 2018-10-29
Rated 3 out of
5
by
Rafal from
It didn't work as expected
The temperature didn't go above 190 C I don't know why
Date published: 2018-06-20