Need assistance? Call us: 1-800-663-4209
OS100E
옵션 디스플레이가 있는 RS232 출력 적외선 센서
RS232出力赤外線センサー(オプションディスプレイ付き)- -18~538 °C(0~1000 °F)温度範囲
- 放射率調整可能:0.1~1.0
- 5種類の異なるアナログ出力モデル
- LED表示モデルあり
Product Overview
- 精度 ± 2 %
- 空気流量 1 CFM
- アラームデッドバンド 5.5°C(10°F)
- アラーム設定値 調整可能、0~100%
- ケーブル長 6 ft
- 制御出力 オープンドレイン
- データインターフェース RS232
- データインターフェースに関する注意事項 シリアルRS232、双方向
- 放射率、最大 1
- 放射率(最小) 0.1
- 放射率に関する注意事項 0.1~1.00、調整可能
- エンクロージャーの定格 IP65, NEMA タイプ 4
- 視野 6:1
- 視野に関する注意事項 6:1(距離/スポットサイズ)
- ハウジング高さ 30.5 mm
- ハウジング長さ 115.3 mm
- ハウジング材質 アルミニウム
- ハウジングの幅 65.5 mm
- レーザー出力 false
- 動作温度(最低) 0 °C
- プロセス温度(最高) 538 °C
- プロセス温度(最低) -18 °C
- 相対湿度、最大 0.95
- 相対湿度の注意 95% RH未満、結露しないこと
- 繰り返し精度 ± 1%
- センサー直径 25.4 mm
- センサー長 63.5 mm
- シリーズID OS100E
- スペクトル応答、最大 14μm
- スペクトル応答、最小 5 μm
- 供給電圧 12から24 Vdc
- 熱衝撃 約30分(25°C(77°F)急激な周囲温度変化時)
- ウォームアップ期間(最大) 3 m
- ウォームアップ時間(最小) 0 m
- 水流量 0.25 GPM
- 水流量注記 0.25 GPM、室温
- 重量 272 g
Supported Applications
The OMEGA OS100E Series miniature infrared transmitters provide non-contact temperature measurement across an industrial range of -18 to 538°C (0 to 1000°F). Each unit pairs a remotely mounted infrared sensor head with a high-performance, microprocessor-based signal conditioner, so the small sensor head can be placed in confined, hard-to-reach places and harsh environments while the transmitter is mounted where it is convenient to wire and read.
Typical uses take advantage of the remote head, the analog and RS232 outputs, and the optional laser sighting:
- Fixed-point process temperature monitoring in tight or hostile locations.
- Integration with meters, chart recorders and PLCs through a choice of analog outputs.
- PC-based configuration and readout over the RS232 interface.
- Targeting assistance using the OS100-LS laser sighting accessory.
This product is not intended for medical use or use on humans. All connections should be made with a shielded cable, 24 AWG stranded wire rated 300V, 105°C (221°F), PVC insulation.
Operating Conditions & Performance
The transmitter measures -18 to 538°C (0 to 1000°F) with an optical field of view of 6:1 (distance to spot size) and a spectral response of 5 to 14 microns. Accuracy, referenced at 22°C (72°F) ambient and emissivity of 0.95 or greater, is ±2% rdg or 2.2°C (4°F), whichever is greater, with repeatability of ±1% rdg. Response time is 100 ms (0 to 63% of final value) and emissivity is adjustable from 0.1 to 1.00.
Power is 12 to 24 Vdc @ 150 mA, with overload protection of 500 mA on the family supply requirement. Minimum load resistance is 1 kΩ for the 0 to 5 Vdc output and 2 kΩ for the 0 to 10 Vdc output.
The housing is NEMA 4 (IP65) die-cast aluminium. Main housing dimensions are 65.5 W x 30.5 D x 115.3 mm L (2.58 x 1.2 x 4.54 inch), the sensor head is 25.4 mm (1 inch) diameter and 63.5 mm (2.5 inch) long, and the unit weighs 272 g (0.6 lb). Operating limits differ by section:
- Main transmitter ambient: 0 to 50°C (32 to 122°F).
- Sensor head: 0 to 70°C (32 to 158°F).
- Sensor head, HT model: 0 to 85°C (32 to 185°F).
- Sensor head with OS100-WC water cooling jacket: 0 to 200°C (32 to 392°F).
Operating relative humidity is less than 95% RH, non-condensing. The series is CE marked and, with the optional laser, complies with FDA 21 CFR 1040.10 as a Class II laser product and European Class 2 per EN60825-1/11.2001; maximum laser optical power is less than 1 mW @ 25°C (77°F).
Configuration Options
Model identity follows OS100E - output - display - temperature. Two base platforms set the display capability:
- OS101E transmitters provide the measurement and outputs without a local display.
- OS102E transmitters add a 4-digit LED display that is switchable between °C and °F.
Output options
The output suffix selects the electrical interface:
- OS101E-MV — 1 mV/°C or °F output.
- OS101E-V1 — 0 to 5 Vdc output.
- OS101E-V2 — 0 to 10 Vdc output.
- OS101E-MA — 4 to 20 mA output.
- OS101E-K — Type K thermocouple output.
High temperature heads
An HT suffix denotes the high temperature sensor head, which extends the head rating from 0 to 70°C (32 to 158°F) up to 0 to 85°C (32 to 185°F). HT versions include OS101E-MA-HT and OS101E-V2-HT. Where still higher head exposure is required, the OS100-WC water cooling jacket allows sensor-head operation up to 0 to 200°C (32 to 392°F).
Key Product Differences
OS101E transmitters (no display)
- OS101E-MV — 1 mV/°C or °F output.
- OS101E-V1 — 0 to 5 Vdc output.
- OS101E-V2 — 0 to 10 Vdc output.
- OS101E-MA — 4 to 20 mA output.
- OS101E-K — Type K thermocouple output.
- High temperature heads: OS101E-MV-HT, OS101E-V1-HT, OS101E-V2-HT, OS101E-MA-HT, OS101E-K-HT.
OS102E transmitters (with LED display)
- OS102E-MV — 1 mV/°C or °F output and LED display.
- OS102E-V1 — 0 to 5 Vdc output and LED display.
- OS102E-V2 — 0 to 10 Vdc output and LED display.
- OS102E-MA — 4 to 20 mA output and LED display.
Accessories
- OS100-MB — mounting bracket.
- OS100-DR — DIN rail mounting adaptor.
- OS100-AP — air purge collar.
- OS100-WC — water cooling jacket, up to 200°C.
- OS100-LS — laser sighting accessory.
- OS100-CA15FT — sensor head extension cable, 4.6 m (15').
- OS100-CA25FT — sensor head extension cable, 7.6 m (25').
- TX8-100 — power/output cable, 30 m (100').
- PSR-24S — regulated power supply, US plug, 90 to 264 Vac input, 24 Vdc output, 400 mA, screw terminals, UL.
- PSU-93 — unregulated power supply, 16 to 23 Vdc, 300 mA max, screw terminal.
PDFs & Manuals
Software & Drivers
Accessories
accessories
cables
installation hardware
OS101102E-MVV1V2MAK-HT