한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
Series-DH
多機能差圧コントローラー、精度0.5%、デジタル表示
- 3-in-1機器により、複数の機器を1つの製品で置き換え、在庫、設置時間、コストを削減
- 流速モードでは、平方根出力が実際の流量曲線と一致し、より高精度を実現
- 120/220 Vacまたは24 Vdcの電源使用により、制御盤への機器組み込みに柔軟性を提供
- セキュアメニュープログラムにより、適切なスキルレベルのユーザーのみが機器操作にアクセス可能
- Modbus®通信により、プロセスおよびHVacシステムの統合と制御をサポート
제품 개요
- 精度の詳細 ±0.5%(77°F(25°C)時)、ヒステリシスおよび再現性を含む。
- ボーレート 9600
- 補償温度、最大 140 °F
- 補償温度、最小 32 °F
- データインターフェース Modbus RTU, RS485
- 表示に関する注意事項 4桁LCD 0.4インチ高さ。設定値およびアラーム状態用LEDインジケーター
- 表示タイプ LCD
- 電気接続 ネジ端子
- エンクロージャーの定格 IP66, NEMA タイプ 4X
- 高さ 3.62 in
- 長さ 1.772 in
- 材料 ABS
- 材料、湿潤 メーカーにお問い合わせください
- 対応媒体 クリーンな乾燥空気 / 不活性ガス, HVAC / 室内空気, 不活性/非反応性ガス
- 取付 1/8 DIN
- 取付方向 水平
- 桁数 4
- 動作温度(最高) 140 °F
- 動作温度(最低) 32 °F
- 出力詳細 4-20 mA DC 最大900 Ωまで
- 出力信号 電流
- 消費電力 7 VA、低電力: 130 mA
- 圧力タイプ 差分
- プロセス接続に関する注記 1/8˝ 内径 × 1/4˝ 外径チューブ用圧縮継手(3.175 mm 内径 × 6.35 mm 外径)。3/16˝ 内径チューブ用オプションバーブ継手
- プロセス接続サイズ 1/8インチ
- プロセス接続タイプ クランプ継手
- 応答時間 250 ms
- シリーズID Series-DH
- セットポイント調整 メニュー設定可能
- 安定性 <± 1%/年
- 電源注記 高電圧電源 = 100-240 Vac、50-400 Hz または 132-240 Vdc、低電圧電源 = 24 Vdc ± 20%。
- 電源タイプ AC / DC
- 供給電圧 100から240 Vac、132から240 Vdc
- スイッチノート 240 Vac抵抗負荷時 8 A
- スイッチ定格 8 A @ 240 Vac
- スイッチタイプ (2) SPDT
- 熱効果 0.020%/°F(77°F時)
- 重量 14.4 oz
- ゼロ点設定調整範囲 メニューからアクセス可能
Supported Applications
The Dwyer Series DH Digihelic® Differential Pressure Controller is a multifunction instrument designed for measuring and controlling differential pressure in air and non-combustible, compatible gases. The series functions as a digital display gage, control relay switch, and transmitter with current output. It supports operation modes for pressure, velocity, and volumetric flow applications across various engineering units.
Operating Conditions & Performance
The Series DH achieves an accuracy of ±0.5% at 77°F (25°C) including hysteresis and repeatability after a 1-hour warm-up period. The instrument operates within an ambient temperature range of 32 to 140°F (0 to 60°C). Response time is specified as 250 ms with dampening set to 1.
Measurement ranges span from 0.25 in w.c. up to 100 in w.c., available via specific model selection for unidirectional and bi-directional spans. Pressure ratings vary by range: models ≤ 2.5 in. w.c. are rated at 2 psi; the 5, 10, and 25 in. w.c. ranges are rated at 5 psi; and the 50 and 100 in. w.c. ranges are rated at 9 psi.
Available Engineering Units
The controller allows selection of multiple engineering units for display, including:
- Pressure: INWC (inches water column), FTWC, MMWC, CMWC, PSI, INHG, MMHG, MBAR, PA, KPA, HPA, OZIN.
- Velocity/Flow: SFPM, M/S, SCFM, M^3H.
Configuration Options
The series offers configurable options for process connections, calibration documentation, and mounting. The standard enclosure is ABS plastic (UL approved 94-V-0) with a face designed to meet NEMA 4X (IP66). Electrical connection utilizes screw terminals.
Power Supply Options
- High Voltage: 100 to 240 VAC, 50 to 400 Hz or 132 to 240 VDC.
- Low Voltage: 24 VDC ±20%.
Output Signals & Communication
- Analog Output: Scalable 4-20 mA DC into a maximum load of 900 Ω (typical 250 to 600 OHMS).
- Digital Communication: Modbus® Protocol RTU over RS485 at 9600 Baud. The factory default address is 50.
Process Connections & Options
The standard process connection is a compression fitting for use with 1/8" ID tubing x 1/4" OD tubing (3.175 mm ID x 6.35 mm OD). An optional barbed fitting (-B) is available for 3/16" ID tubing.
Additional options include:
- -FC: Factory calibration certificate.
- -NIST: NIST traceable calibration certificate.
Key Product Differences
The Series DH is available in specific model numbers corresponding to distinct pressure ranges. Models are categorized by unidirectional and bi-directional capabilities, with velocity and volumetric flow modes not available on bi-directional range units or models DH-009 and DH-010.
Unidirectional Range Models
- DH-002: 0 to 0.25 in w.c.
- DH-004: 0 to 1.0 in w.c.
- DH-006: 0 to 5 in w.c.
- DH-007: 0 to 10 in w.c.
- DH-008: 0 to 25 in w.c.
- DH-009: 0 to 50 in w.c. (Pressure only).
- DH-010: 0 to 100 in w.c. (Pressure only).
Bi-directional Range Models
- DH-012: ±0.25 in w.c.
- DH-014: ±1.0 in w.c.
- DH-015: ±2.5 in w.c.
- DH-016: ±5.0 in w.c.
- DH-017: ±10 in w.c.
DH-001002003004005006007030008009010011012013014015016017-B-FC-NIST