검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Model-KFD0

루프 전원 갈바닉 바리어, 안전 트랜스미터용, DIN 레일 장착형

ループ駆動型ガルバニックバリア(安全用トランスミッター用)、DINレール取付け
  • 대부분의 표준 DIN 레일에 장착하도록 설계됨
  • 위험 구역에서 사용 승인됨
Model-KFD0
시작 ¥ 123,621
ループ駆動型ガルバニックバリア(安全用トランスミッター用)、DINレール取付け Model-KFD0 Model-KFD0
loading all models
제품 개요
  • 응용 분야 유체 측정 및 제어, 산업 및 제조업
  • 정전용량 FM: 0.042 μF, 0.267 μF, 0.267 μF
  • 인증 IIA (D, F, G), IIB (C), IIC (A, B)
  • 전류 출력 38.2 mA
  • 인덕턴스 FM: 0.5 mH, 2.5 mH, 2.5 mH
  • 입력 제어 신호 21 ~ 35 Vdc
  • 작동 온도, 최대 140 °F
  • 최소 작동 온도 -4 °F
  • 출력 세부 정보 4~20 mA
  • 출력 신호 현재
  • 전력 소비 150 mW
  • 응답 시간 ≤ 20 µs
  • 응답 시간 사양 참고 0에서 ≤ 20 µs, 800 부하에서 ≤ 600 µs
  • 시리즈 ID Model-KFD0
  • 온도 드리프트 ≤ 0.5 µA/°C
  • 전압 출력 23.1 V
  • 무게 4.2 oz

Supported Applications

The Dwyer Model KFD0 is a loop-powered galvanic barrier designed to provide complete isolation for communication with intrinsically safe transmitters approved for use in hazardous areas. The series is specifically used to isolate voltages for HHT series applications, eliminating the need for a high integrity earth ground required by shunt type diode safety barriers.

Operating Conditions & Performance

The Model KFD0 operates within an ambient temperature range of -4 to 140°F (-20 to 60°C) with a specified temperature drift of ≤ 0.5 µA/°C. It is designed for loop-powered operation, requiring no external power supply.

  • Signal Range: Hazardous area input supports 4-20 mA (linear transmission 1-22 mA); safe area output provides a 4-20 mA signal range with transmitter voltage ≤ 30 VDC.
  • Voltage Requirements: Available transmitter voltage is ≥ 16 V for supply voltages > 21 V; the model supports up to 23.1 V (Vo) and 38.2 mA (Io).
  • Response Time: ≤ 20 µs at 0 load, and ≤ 600 µs at 800 load.
  • Power Dissipation: Maximum power dissipation is 150 mW @ 20 mA and V <24 V.

Configuration Options

The series supports DIN rail mounting on most standard rails. The physical dimensions are a height of 4-3/8 [111.20], width of 4-37/64 [116.46], and depth of 25/32 [20.00].

  • Approvals: CE, FM APPROVED (Class I, Zone 1, Groups IIC, IIB, IIA; Class I, II, III, Div. 2, Groups A, B, C, D, F, G).
  • Hazardous Area Parameters: Configured for Group IIC (A, B), IIB (C), and IIA (D, F, G) with capacitance values of 0.042 µF, 0.267 µF, or 0.267 µF and inductance values of 0.5 mH, 2.5 mH, or 2.5 mH.
  • Accessories: Aluminum DIN rail (Model A-360) is available for mounting support.

Key Product Differences

The primary configuration in the series is Model KFD0-SCS-EX1.55, described as a loop-powered galvanic barrier compatible with Dwyer Series HHT-IX transmitters. This model provides specific electrical limits for hazardous area isolation without requiring external power.

ko-KR
ja_JP
설정 저장