検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-IEF

4~36インチ配管用電磁流量トランスミッター、取付調整可能

  • 現場で設定可能なセットアップディスプレイ(-LCD一体型オプションまたはリモートアクセサリーA-IEF-DSP)により、パイプサイズ、パイプ材質、液体種類、アナログ出力、パルス/周波数出力、アラーム出力、通信出力、ダンピング、校正係数など複数のディスプレイ構成を通じて1モデルで多様なアプリケーション設定に対応可能
  • 温度、密度、粘度の変化に対しても維持される高性能精度によりシステム効率を維持
  • セットアップウィザードと使いやすい設置ツールにより、迅速かつ簡単な注文とセットアップが可能で、正確な設置を実現
  • 付属の厚さゲージとメジャーテープで正確な設置深さを保証するアクセサリーセットアップキットA-IEF-KITで時間を節約
  • 可動部品がなく摩耗や破損がないためコスト削減、長寿命、メンテナンス最小化を実現し、電極は汚れ付着を抑制
  • ホットタップキットによる稼働中システムへの設置やシステム停止なしでの簡単取り外しを可能にする隔離バルブアクセサリーオプションで設置コストを最小化
  • 4インチ(102 mm)、6インチ(150 mm)、8インチ(200 mm)のカーボンスチールSchedule 40パイプ用に標準でNISTトレーサブルの合否検証証明書を含む必要書類を添付
Series-IEF
販売元 ¥ 499,775
4~36インチ配管用電磁流量トランスミッター、取付調整可能 Series-IEF Series-IEF
loading all models
製品の概要
  • 精度 ± 1 %
  • 応用例 農業および水耕栽培の応用, ボイラー, 化学精製所, 化学物質, 流体計測と制御, 石油, ポンプ制御, 水質モニタリング
  • 導電率 > 20 µS/cm
  • 制御出力 警報
  • 表示範囲 0 ~ 100% グリコール表示 選択可能
  • 線形流量、最大 20 ft/s
  • 線形流量、最小 0 ft/s
  • 材料 アルミニウム
  • 材料、湿潤 ポリマー, シリコン, ステンレス鋼
  • 対応媒体 導電性液体, 腐食性化学薬品/酸/アルカリ
  • 動作温度(最高) 160 °F
  • 動作温度(最低) -20 °F
  • 出力詳細 (1) アナログ: 4-20 mA、0-5 V、0-10 V または 2-10 V(表示選択可能);(1) パルス/周波数: 0-15 Vピークパルス、0~500 Hz またはスケーラブルパルス出力(表示選択可能);(2) アラーム: (1) 空管検出または最小/最大速度(表示選択可能);(1) 逆流出力表示
  • 出力信号 電流、電圧、DCパルス
  • 圧力低下、マックス 0.1 psi
  • 圧力降下ノート 4インチ(101.6 mm)以上の配管内で、12 ft/sでの圧力損失< 0.1 psi
  • 圧力限界 最大400 psiまで
  • プロセス接続サイズ 1インチ
  • プロセス温度(最高) 250 °F
  • プロセス温度(最低) 15 °F
  • シリーズID Series-IEF
  • 最大保管温度 185 °F
  • 保管温度(最低) -40 °F
  • ストレートランの要件 >10 直径 上流、直径 >5 下流
  • 電源タイプ AC / DC
  • 供給電圧 12から42.4V直流、0.25A@24Vdc;12から36 VACへ

Supported Applications

The Dwyer Series IEF Insertion Electromagnetic Flow Transmitter is designed to measure fluid velocity in conductive liquids, including clean or dirty non-coating media with conductivity greater than 20 microsiemens. The series supports applications such as boiler feed water, chilled water, condenser water, irrigation, process and coolant flow, groundwater remediation, chemical processing, pump protection, wastewater, and mining.

Units are adjustable to fit pipe sizes from 100 mm to 900 mm (4 in to 36 in) across most popular plastic and metal pipes, including carbon steel, stainless steel, copper, UPVC/PVDF, galvanized steel, mild steel, and brass. Installation requires straight run lengths of greater than 10 pipe diameters upstream and greater than 5 downstream.

Operating Conditions & Performance

The Series IEF operates within an ambient temperature range of -29 °C to 71 °C (-20 °F to 160 °F) and a process temperature range of -9 °C to 121 °C (15 °F to 250 °F). Storage temperatures are rated from -40 °C to 85 °C (-40 °F to 185 °F), with humidity tolerance up to 100%.

Performance specifications vary by accuracy class and pipe size:

  • Standard Accuracy Units (Codes L, G, S): ±1 % FS for pipes from 4 in to 36 in (100 mm to 900 mm).
  • High Accuracy Units (Codes F, I, E, T, H): ±1 % of reading from 0.6 m/s to 6 m/s (2 ft/s to 20 ft/s); ±0.006 m/s (±0.02 ft/s) at velocities below 0.6 m/s.
  • Measurement Range: Standard range is 0 m/s to 3 m/s (0 ft/s to 10 ft/s), with options available up to 6 m/s (20 ft/s).

The transmitter maintains a pressure rating of 27.6 bar (400 psi) @ 37.8 °C (100 °F). Pressure drop is less than 0.006 bar (0.1 psi) at 3.7 m/s (12 ft/s) in pipes 100 mm (4 in) and larger.

Configuration Options

The Series IEF offers configurable options for process connections, electrical housing connectors, output signals, displays, and communication protocols to accommodate diverse installation requirements.

Process Connections & Wetted Materials

  • Process Connection: 1 in NPT (Code N) or 1 in BSPT (Code B). Accessory full port isolation valves are available in brass (A-IEF-VLV-BR) and 316 SS (A-IEF-VLV-SS).
  • Wetted Materials: Body shaft/fitting: 316 SS; Electrodes: 316 SS; Electrode cap: Polymer/polystyrene; O-ring: Silicone.

Housing & Electrical Connections

  • Enclosure Ratings: NEMA 6P (IP68) for non-display models; NEMA 4X (IP66) for -LCD option models. Housing material is powder coated die cast aluminum.
  • Electrical Connectors: Model selectable options include 1/2 in female NPT conduit connection without cable (-CND), PG 16 gland without cable (-PG), or PG 16 gland with (2) 3 m (10 ft) plenum rated cables (-10). Additional accessory cable lengths up to 61 m (200 ft) are optional.

Outputs & Communication

  • Analog Outputs: Display selectable 4 mA to 20 mA, 0 V to 5 V, 0 V to 10 V, or 2 V to 10 V.
  • Pulse/Frequency Output: 0 V to 15 V peak pulse, 0 Hz to 500 Hz, or scalable pulse output (display selectable).
  • Alarm Outputs: Two isolated solid state outputs for empty pipe detection or minimum/maximum velocity; one reverse flow indication.
  • Communication (-COM Option): Selectable BACnet MS/TP or Modbus® RTU over 2-wire RS-485. Supported baud rates include 9600, 19200, 38400, 57600, 76800, and 115200 bps.

Power & Display

  • Power Supply: 12 Vdc to 42.4 Vdc or 12 Vac to 36 Vac, 1 A.
  • Display (-LCD Option): Integral graphic LCD with backlight (5.08 cm x 5.08 cm / 2 in x 2 in). The remote display option (A-IEF-DSP) allows for configuration adjustments and saving settings to a computer.

Key Product Differences

The Series IEF model number structure defines specific accuracy, connection, and feature configurations:

  • Accuracy Codes: -L (Standard 4-10 in), -G (Standard >10-36 in), -S (Standard 4-36 in); High Accuracy codes include -F (4 in), -I (6 in), -E (8 in), -T (10 in), and -H (4-10 in).
  • Process Connection Codes: N for 1 in male NPT; B for 1 in male BSPT.
  • Electrical Connector Codes: CND, PG, or 10 as defined above. Additional options include LFMC (Liquid-Tight Flexible Metal Conduit Fitting) and NCH (Female NPT Conduit Hub).
  • Option Codes: -LCD for integral display; -COM for BACnet/Modbus communication; -NIST for six-point traceable calibration certificate; -FC for factory calibration at 0.5% of reading single point; -CC for custom configuration.

Note: For maximum flowrates greater than 10 ft/s (3 m/s), the -CC option is required. The standard 3-in-1 plane max flowrate is limited to 3 m/s (10 ft/s).

アクセサリー

accessories

Set up kit, includes: set up display, measuring tape, universal power adapter for high accuracy installation and UTG thickness gage.
TWD63,274 / each
0 在庫あり
1-1/4 in full port isolation valve brass kit. (Brass valves are non-RoHS compliant.)
TWD14,325 / each
0 在庫あり
1-1/4 in full port isolation valve, 316SS kit.
TWD28,476 / each
0 在庫あり
Isolation valve kit, includes 316SS 1 in to 1-1/4 in BSPT bushing, 316SS BSPT valve, 316SS BSPT threaded nipple with a 316SS BSPT threadolet.
TWD27,399 / each
0 在庫あり

cables

Plenum rated cable 50 ft (15.2 m).
¥28,142 / each
0 在庫あり

meters/controllers

Setup display for field configuring non-display models.
¥177,975 / 各
0 在庫あり
Full functional remote display for use with Series IEF.
¥242,727 / 各
0 在庫あり
シリーズIEF用のリモート表示を示す。
¥163,312 / 各
0 在庫あり
LCD display to retrofit non-display models.
¥97,286 / 各
0 在庫あり
IEF-FIETHLGSNB-CNDPG10LFMCNCH-COM-LCD-CC-CCE-NIST
精度
プロセス接続
ハウジングの電気接続
通信
ディスプレイ
オプション
"
ja-JP
ja_JP
設定を保存する