日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-616KD
616KD 差圧トランスミッター、ワンタッチ®キャリブレーション
- シンプルなキャリブレーションプッシュボタンによりゼロ点とスパンをリセットし、設置および使用期間中の時間を節約
- スペース、シンプルさ、コストパフォーマンスが重要なOEM用途に適したコスト効果の高いコンパクトな装置
- レンジと精度の選択により幅広い用途に対応し、部品数を最小限に抑え設計の標準化を促進
- オプションの1/8" NPTプロセス接続により、金属バーブ継手または金属チューブ用の圧縮継手との使用が可能 テスト用
製品の概要
- 応用例 フィルター監視
- 補償温度、最大 50 °C
- 補償温度、最小 -6.67 °C
- 電気接続 ネジ端子
- エンクロージャーの定格 IP20, NEMA タイプ 1
- 長期安定性 ± 5% FS/年
- 材料、湿潤 メーカーにお問い合わせください
- 対応媒体 クリーンな乾燥空気 / 不活性ガス, HVAC / 室内空気, 不活性/非反応性ガス
- 取り付けに関する注意事項 垂直型(下向き圧力ポート)
- 動作温度(最高) 60 °C
- 動作温度(最低) -17.8 °C
- 圧力タイプ 差分
- プロセス接続に関する注記 バーブ付き、1/8インチおよび3/16インチ(3 mmおよび5 mm)内径のゴムまたはビニールチューブに適合、テスト用
- プロセス接続サイズ 1/8インチ、3/16インチ
- プロセス接続タイプ 段付きバーブ継手
- シリーズID Series-616KD
- スパン調整 プッシュボタン
- 電源タイプ AC / DC
- ゼロ点設定調整範囲 プッシュボタン試験
Supported Applications
The Dwyer Series 616KD One-Touch® Differential Pressure Transmitter senses the pressure of air and non-combustible, compatible gases. The series is designed for simplicity in applications such as OEM integration, air handlers, duct pressure monitoring, variable air volume systems, and filter monitoring.
Operating Conditions & Performance
The Series 616KD operates within a temperature range of 0 to 140°F (-17.8 to 60°C), with a compensated temperature range of 20 to 122°F (-6.67 to 50°C). Accuracy varies by model variant: the 616KD-A offers ±0.25% FS, the 616KD-B provides ±1% FS, and the standard 616KD delivers ±2% FS. Stability is rated at ±1% F.S./yr.
Pressure limits are defined by range: ranges of 5 in w.c. or lower have a limit of 2 psig (13.8 kPa), while ranges from 10 to 40 in w.c. support up to 5 psig. The enclosure is rated NEMA 1 (IP20) and tested to UL 2043 for plenum applications.
Measurement Ranges
The series supports a wide range of factory-calibrated differential pressure spans, including:
- Inches Water Column (in w.c.): 0 to 1, 2, 3, 5, 10, 15, 20, 25, and 40 in w.c.
- Pascals (Pa): 0 to 250, 500, 750, 1250, 2500, and 5000 Pa.
- Bidirectional Ranges: Options include ±1, ±2, ±3, ±5 in w.c. and ±250, ±500, ±750, ±1250 Pa.
Configuration Options
The Series 616KD is configurable across accuracy classes, output signals, power requirements, and optional accessories. The unit features a digital push-button for zero and span adjustments without requiring external reference pressure sources.
Output Signals & Power Requirements
- Current Output: 4-20 mA (standard).
- Voltage Outputs (Field Selectable): Options include 0 to 10 V, 0 to 5 V, 2 to 10 V, and 1 to 5 V.
- Power Supply:
- 4-20 mA output: 10–35 VDC (2-wire) or 12–26 VAC (4-wire).
- Voltage outputs for A/B models: 10–35 VDC (3-wire) or 12–26 VAC (4-wire); 10 V output requires 13–35 VDC.
- Standard 616KD voltage options: 16 to 36 VDC (2 or 3-wire) or 20–28 VAC (3-wire).
Process & Electrical Connections
- Process Connection: Barbed, dual size to fit 1/8" and 3/16" (3 mm and 5 mm) ID rubber or vinyl tubing. An optional 1/8" NPT connection block is available.
- Electrical Connections: Screw-type terminal block.
Key Product Differences
The series distinguishes itself through three primary accuracy variants and specific option codes that define the transmitter's performance envelope and physical configuration.
- 616KD-A: High-accuracy variant with ±0.25% FS; thermal effect is ±0.02% FS/°F. Note: 0.25% FS accuracy is not available in ranges -00, -01, -10, or -11.
- 616KD-B: Mid-range variant with ±1% FS; thermal effect is ±0.04% FS/°F.
- Standard 616KD: General-purpose variant with ±2% FS; thermal effect is ±0.06% FS/°F (includes zero and span).
Available options include an aluminum tag (-AT), factory calibration (-FC), NIST certification (-NIST), terminal cover (-TC), and voltage output selection (-V). The enclosure enables mounting on a 35 mm DIN rail via side or back clips.
616KD-A-B-00-01-02-03-50-51-52-53-54-55-56-57-58-V-AT-COC-FC-N-NIST-TC-Z1-Z2




