Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
OMPBD7D-P
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accessory Type | N/A |
| Approvals | Certifications: UL, CSA, CCC, CE Conformity to Standards-CE Marked: UL 508, EN 60947-1, EN 60947-5-1, EN 60947-5-5 Terminal Identification: EN/IEC 60947-1 |
| Contact Blocks | N/A |
| Mechanical Life | 2,000,000 Cycles |
| Mounting Torque (Front-of-Panel) | N/A |
| Operating Forces (Front-of-Panel) | N/A |
| Operating Temperature, Max | 60 °C |
| Operating Temperature, Min | -25 °C |
| Pushbutton Material | N/A |
| Pushbutton Size | N/A |
| Relative Humidity | 50 to 95% RH |
| Relative Humidity Note | 50 to 95% RH from 25 to 60˚C (77 to 140˚F) |
| Series ID | OMPBD7D-P |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -40 °C |
| Switch Type | N/A |
| Thermal Current | 5 A max |
| Tightening Torque | 0.7 to 0.9 Nm (6 to 8 lb-in) |
| Vibration and Shock | Vibration Assembled to Panel: Tested at 10 to 2000 Hz, 1.52 mm displacement (peak-to-peak) max/10 G max for 3 hr duration, no damage;Shock: Tested at 1⁄2 cycle sine wave for 11 ms; no damage at 100 G |
| Wire Gauge | 18 to 14 AWG |
| Wire Gauge Note | Screw terminal : #18 to 14 AWG (0.75 to 2.5 mm2), max (2) #14 AWG, uses same size wire only |
| See All Specs | |