Netherlands 07077 03815 | International +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
CL532-Calibrator
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| 2-Wire Transmitter Simulate | Adjust loop current from 0 to 24 mA or -25 to 125% when powered by an external supply; LOW SUPPLY flashes to indicate a misconnection. |
| Accuracy | ± 0.012 % |
| Accuracy Detail | ±0.012% rdg + 0.004 mA |
| Battery Size and Type | Alkaline 9V |
| Battery life | 18hr |
| Electrical Connection | Alligator Clips |
| Height | 180 mm |
| Lead Length | 610 mm |
| Length | 56 mm |
| Loop Supply Limits | 2 to 60 Vdc; Drive Capability: 1200 Ω at 20 mA for life of battery; Burden: <2V at 20 mA |
| Measuring Range | Read Current: Read 0 to 24 mA or -25 to 125%; CURRENT LIMITED flashes at >24 mA, protecting devices in the loop.; Read DC Voltage: Read 0 to 60 Vdc with 2x overrange ability and flashing OVERRANGE indicator; Power Measure: Power the loop and read 0 to 24 mA or -25 to 125%; CURRENT LIMITED flashes at >24 mA, protecting devices in the loop. |
| Miscellaneous | EZ-Check Switch: Gives instant access to 4 and 20 mA or other user-set span limits; in read modes, he EZ-Check switch provides a max/min log of reading; EZ-Step Button: Allows one-handed stepping up and down the span in 6 different step sizes; Adjusts output by 0.001 mA (0.01%); EZ-Dial Knob: push and turn for 100x faster adjustment—by 0.100 mA (1.00%) |
| Operating Temperature, Max | 60 °C |
| Operating Temperature, Min | -20 °C |
| Over-Voltage Protection | 120 Vrms for 30 seconds, 240 Vrms for 15 seconds |
| Overcurrent Protection | 24 mA DC |
| Relative Humidity | 10% ≤RH ≤90% [0 to 35°C (32 to 95°F)], non-condensing; 10% ≤RH ≤70% [35 to 60°C (95 to 140°F)], non-condensing |
| Series ID | CL532-Calibrator |
| Source Current | Source 0 to 24 mA or -25 to 125% into ≤1200 Ω; a flashing HIGH Ω indicator appears if improperly connected |
| Storage Temperature, Max | 60 °C |
| Storage Temperature, Min | -30 °C |
| Temperature Effect | ±50 ppm/°C |
| Weight | 326 g |
| Width | 84 mm |
| See All Specs | |
PDFs & Manuals
