Series-DHII

Click and hold to zoom

Item# Series-DHII

Added to Your Shopping Basket

In Stock

Lead Time (If not in stock): 0 week

Brand
Accuracy Detail	± 0.5% at 77°F (25°C) including hysteresis and repeatability (after 1 hour warm-up)
Baud Rate	9600
Compensated Temperature, Max	140 °F
Compensated Temperature, Min	32 °F
Data Interface	Modbus RTU, RS485
Display Note	4 digit backlit LCD 0.6˝ height. LED indicators for set point and alarm status
Display Type	LCD
Electrical Connection	1/2 in NPT female Conduit with Screw Terminal block
Enclosure Ratings	IP66, NEMA Type 4X
Materials	Aluminum, Glass
Materials, Wetted	Consult Factory
Measurement Pressure Type	Differential
Media Compatibility	Clean dry air / inert gas, HVAC / room air, Inert / non-reactive gases, Helium, Nitrogen, Non-Corrosive Dry Gases
Mounting Orientation	Horizontal
Number of Digits	4
Operating Temperature, Max	140 °F
Operating Temperature, Min	32 °F
Output Detail	4-20 mA DC into 900 Ω max
Output Signal	Current
Power Consumption	7 VA, Low Power: 130 mA
Process Connection Size	1/8 in
Process Connection Type	NPT Female
Response Time	250 ms
Response Time Note	250 ms (damping set to 1)
Series ID	Series-DHII
Set Point Adjustment	Menu Configurable
Stability	<± 1%/year
Supply Power Note	High voltage power = 100-240 VAC, 50-400 Hz or 132-240 VDC, Low voltage power = 24 VDC ± 20%.
Supply Power Type	AC/DC
Supply Voltage	100 to 240 Vac, 132 to 240 Vdc
Switch Note	8 A at 240 VAC resistive
Switch Rating	8 A @ 240 Vac
Switch Type	(2) SPDT
Thermal Effects	0.020%/°F @ 77°F
Weight	2.62 lb
Zero Setting Adjustable Range	Accessible via Menus
See All Specs Show Less

PDFs & Manuals

Static pressure tip, for 3/16" and 1/8" ID plastic or rubber tubing.

€ 14,47 / each

0 In Stock

QTY